weld的例句大全

Fracture toughness of heat-affected zone ( HAZ ) was between the base metal and weld metal.

焊接热影响区的断裂韧性介于母材和焊缝金属之间.

Industrial-process control valves-Dimensions-End-to-end dimensions for butt weld, two-way, globe-type, straight pattern control valves.

产业过程控制阀.尺寸.对接焊接, 两向, 球型, 垂直模式控制阀的末端对末端尺寸.

Buckling of thin to butt weld was investigated using inherent strain method as an equivalent load.

提出了基于固有应变对接薄板失稳分析的基本方程.

Two passes ASAW technology for girth weld of LPG cylinder with lock butt joint is introduced.

本文介绍了液化石油气钢瓶环缝锁底接头、两道埋弧焊工艺.

The corrosion behavior of austenite stainless steel weld joint in the different acidic medium was studied.

研究了奥氏体不锈钢焊接接头在不同酸性介质中的腐蚀行为.

Fracture Toughness Investigation of the Fusion Area of Stainless Steel Weld Overlay Specimens Before and After Hydrogen Charging

不锈钢堆焊试件熔合区充氢前后的断裂韧性研究

This paper investigated the hydrogen effects on facture toughness in the fusion area of stainless steel weld overlay.

研究了氢对不锈钢堆焊层熔合区的断裂韧性的影响作用。

Arc strike marks on base metal outside the weld joint should be avoided but if present should be treated as defects requiring removal or repair.

应防止在焊接接头之外的母材上产生弧击痕迹，但是如果出现了，就应按照焊接缺陷来进行处理，需要清除或补焊。（请指正）

Typing done directly from an audiotape. full weld-on pipe base screen

直接根据录音磁带打字带中心管的全焊接筛管

The progress of the backing weld technology for stainless steel tubes is reviewed.

综述了不锈钢管打底焊接技术的进展,指出了各种方法的特点及应用场合.

Hard Facing is weld deposited Cobalt base alloy.

硬面焊接钴基合金沉淀物.

Design of Weld-Assembly Workshop for Citroen-fukang Car Body

神龙富康轿车车身焊装车间设计

Especially suitable for inert gas protection weld and gas cutting.

特别适用于惰性气体保护焊及气切割.

Excellent gas cutting property and weld ability.

具有优异的焊接性能和切割性能.

Fatigue specimens of the details were made in accordance with the patterns of the arris weld.

依据钢桥设计中所采用的钢梁棱角焊缝构造细节形式，模拟设计制备了该细节的疲劳试件。

In this paper, the fatigue problem of beam joints of steel bridges is studied through examining the arris weld.

本文研究了钢桥钢梁中棱角焊缝构造细节的疲劳问题。

Fatigue specimens of the details were made in accordance with the patterns of the arris weld. The fatigue resistance curves and relevant statistical parameters are obtained through the analysis of the fatigue experiments and the FEM analysis.

通过疲劳试验研究和有限元分析，确定了该细节的疲劳抗力曲线和有关的统计参数，并建立了棱角焊缝构造细节疲劳破坏模型。

Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.

指示凹焊缝 、 凸焊缝或平焊. 增加高度以配合其他焊接符号.

Study on microcomputer control system of weld penetration in argon arc welding using infrared monitor

红外检测钨极氩弧焊焊缝熔深微机控制系统的研究

Research on Weld Roller Machine of New Type on-line Automatic Stainless Argon Arc Welding

新型在线全自动不锈钢氩弧焊管焊缝辊轧机的研制