wettability的例句大全

It affects the plate dimensional stability and printing plates, wettability performance.

它感化版材尺寸的稳定性和印版的耐印辛 、 湿润本能机能.

The interfacial reactions enhance the wettability and promote the spontaneous infiltration process.

界面反应的存在提高了润湿性,促进了无压自发浸渗.

Wettability is not stable and falters.

润湿性并不稳定和衰退.

Wettability is the potential of a surface to interact with liquids with specified characteristics.

润湿性则是表面同特定性能的液体,相互作用的势能.

Wettability is the potential of a surface to interact with liquids wids specified characteristics.

润湿性则是固体表面同特定性能的液体,相互作用的势能.

The relationships of dispersion-aggregation state of particle suspensions and wettability, zeta potential of particles are examined.

研究了亲水性和疏 水性 两大类型颗粒在水中的分散规律及颗粒分散行为与表面润湿性 、 表面电位的关系.

Nitrogen protection can improves wettability of lead-free solder and solder joint quality.

氮气保护可以改善无铅钎料的润湿性,提高焊点质量.

The moisture content of the atmosphere has a profound effect on the wettability of glass.

大气中水分的含量对玻璃的浸润性具有显著影响.

The results indicated that the wettability and dyeing ability of modified wool fabrics were improved obviously.

结果表明,改性整理能有效提高羊毛织物的润湿性及其对活性染料的染色性能.

The resin had good heat storage stability and pigment had widely wettability.

得到的树脂具有良好的热储稳定性,颜料广泛润湿性.

Viscosity measurement differs with the resin and shows differences in wettability.

粘度的测量由于环氧树脂不同而差异,并且显示出湿润度的不同.

With the increasing of the wettability of the reservoir, the remaining oil saturation decreases slowly.

随着储层润湿性的增强, 剩余油饱和度降低的速度减慢.

A wide variety of resin and the ability of different, wettability.

树脂种类众众和不不差别, 湿润的本领也不不异.

Such curvature has no effect on wettability.

这种曲度对润湿性并无影响.

The retention and adsorption of HACDS in the core are the main mechanisms for wettability change.

分析认为HACDS在岩心中形成吸附膜是导致岩心润湿性改变的主要原因.

By using this process, the wettability is obviously improved between the hard metal and the liquid state silver brazing flux and copper brazing flux.

采用这种方法可以明显改善硬质合金与液态银钎料和铜钎料的润湿性；

The wettability between the glass and dumet wire depends on both the cleanliness and constitution of surface layer and the heating conditions.

玻璃与杜美丝的润湿性决定于表面层的净化程度和构成及加热条件。

The influence of brazing temperature and time on the wettability is significant.

钎焊温度和时间对润湿性有重要影响。

Influence of Roughening Treatment of Plastic Surface on Its Wettability

塑料表面糙化处理对其润湿性能的影响

When the wettability is neutrally and slightly water wet, the displacement efficiency is maximal.

润湿性为中性或弱水湿时, 微观驱替效率达到最大.