介绍的例句大全

The mathematic base and the basic coding idea of the fractal image compression are introduced in this paper.

介绍了分形图像压缩的理论基础和基本编码思想。

In this paper, we introduced a new gap coding method-simple indel coding and we compared it with coding gaps as missing data and the fifth character.

介绍了一种新的空位编码方式&简单indel编码，并将它与将空位编码成丢失的数据和编码成第5性状作了比较。

This paper particularly introduces how to reduce two main welding defeat made in resistance spot welding for VDSS: blistering and gas expulsion holes.

前言：本文重点介绍了如何减少V DSS钢板点焊时容易产生的两种主要焊接缺陷：鼓包和气孔；

S In this paper polyacrylate modified layered white bole nano composite was prepared by multi step exchange reaction and diffusion polymerization method.

介绍了通过多步交换反应及扩散&聚合的方法，制备出聚丙烯酸酯改性层状白泥纳米复合物。

This report introduced 8 kinds of humidity test methods, and recommended boiling test and double 85 humidity test with low voltage as the most effective ones.

本文介绍了八种用来衡量电阻器耐湿能力的潮湿试验方法，从中推荐煮沸试验和双85潮湿施加低电压试验，作为最有效的方法。

And then, four nuclear boiling heat transfer models are focused on.

其次，重点介绍了核态沸腾换热的四种经典模型。

The reasons of low combustion efficiency and low boiler capacity are analyzed, the mechanism on combination combustion of the grate-fired boiler are introduced as well.

分析了SHL20-25/400型链条炉燃烧效率低及锅炉出力不够的原因，介绍了链条炉复合燃烧机理。

The design and application of PLC-based control system for the turn-over device of the heavy rail are introduced and the critical control algorithms for such a few operations as accurate positioning of the steel fork for the turn-over device and follow-up of the transfer bogie are emphatically described.

介绍基于PLC的重轨翻钢机控制系统的设计及应用效果，重点阐述了应用PLC实现翻钢机钢叉准确定位、翻钢时小车的随动等关键控制算法。

The location principle of wider head bobbin holder of spinning machine is analyzed, and then the adjustment of the bobbin holder are introduced in detail.

分析了纺丝筒子座组合件的定位原理，详细介绍了筒子座组合件的调整方法。

Classificatian of pig is briefed, and sensory characteristic and disposing measure of boar and fat pig are distinguished.

简单介绍了生猪的种类，重点区分了肥猪与种猪的感观特征及处理措施。

Introduced the causes of motion image blurring and geometric distortion and the methods to deblur.

随后又介绍了导致运动图像模糊及几何畸变的原因及对应消除模糊的方法。

By introduction of the basic concept, design philosophy of the neutral earthing, and the method of integrating theory with practice, why the neutral earthing with blowout coil for the Three Gorge 35 kV electric distribution network and specific connection measures are taken are described.

该文通过介绍中性点接地的基本概念、设计思想和理论联系实际的方法展开分析与研究。阐明了三峡35kV配电网络中性点采取消弧线圈接地方式的原因及解决其接线的具体措施。

In this paper, the characteristics of TBM combined blowing technology in steelmaking plant of Meis-han has been introduced. And the influence of operation in medium phosphorous hot metal, metal charge consumption, converter lining after using this technology.

介绍TBM顶底复吹技术特征，在梅山炼钢厂应用时，以及运用该技术对冶炼中磷铁水操作、钢铁料消耗及炉衬的影响，通过使用TBM技术有效的改善了梅山的脱磷。

This paper presents the cause of severe coking, and theoretical basis for installing steam blower in burner area as well as the application result.

为此介绍了锅炉水冷壁严重结焦的原因和在燃烧器区域加装蒸汽吹灰器的理论依据及加装后的效果。

Improvement of PLC control system on new steam soot-blower in heat pipe preheater is introduced.

介绍了可编程控制器在新型蒸汽巡扫吹灰装置中的应用与改进。

The design principal, system construction and function requirement of centrifugal and axial blower and compressor is introduced.

介绍了透平式鼓风机及压缩机热力性能测试系统的设计原理、系统结构和功能要求。

This paper presents an introduction to 650 blooming reheating furnace which has crisscross choker at the preheating section. It includes the installation of the crisscross choker, its structure features and its effects.

本文介绍了预热段设置有交错扼流装置的650开坯加热炉，内容包括交错扼流装置的设置、结构特点，以及它的作用与效果。

Key block methods are applied to analysis of rock stability for underground plant in Baise hydraulic project, including analysis of unlocated, located and random blocks, block visualization, block stability analysis and reinforcement measures.

介绍了关键块体理论的工程应用技术，包括不定位块体分析、定位块体分析、随机块体分析、块体形态分析与显示、块体稳定性分析及支护措施建议等。

The final passage introduces the main circuit design, filter inductance design, transformer design, DC blocking capacitor selection, soft-switching design and implementation as well as master computer basic control of discharge power supply.

该章较为详细的介绍了主电路设计，滤波电感和变压器设计，隔直电容的选取，软开关的设计与实现以及上位机对放电电源的基本控制。

That's why teachers often start the year by introducing the letters of the alphabet& the building blocks of writing.

这就是为什么老师在幼儿园开学的第一天就开始介绍26个英文字母-写作的最基本元素。