仿真的例句大全

This paper analyzes the failure mechanism of gears, cooperates dynamics and FEM to calculate fatigue life of gears, then predicts residual fatigue life of third speed gears of transmission case based on known damage history.

本文分析了齿轮的失效机理，运用动力学和有限元联合仿真法来计算齿轮总的疲劳寿命，结合齿轮的服役历史对变速箱三挡啮合齿轮的剩余疲劳寿命进行了预测，并给出了预测模型。

It was found out as far as the maximum channel delay is less than the cyclic prefix, the effect of timing synchronization errors i.e. ISI is drastically reduced.

仿真结果表明，只要最大信道延时小于循环前缀的长度，定时同步错误所引起的码间干扰将大幅降低。

Analysis and Simulation of Flow Characteristics of Cycloidal Pump

摆线泵流量特性分析及计算机仿真

Multi-Objective and Varying Parameter Optimization of Machining Parameters Based on NC Simulation Data

基于仿真数据的数控铣削加工多目标变参数优化

By means of the model, the dynamic characteristics of marine nuclear steam turbine plant under the rapidly varying duty working conditions is calculated and analyzed.

利用该仿真模型对快速变负荷工况下船用核汽轮机装置的动态特性进行了计算分析。

The result indicates that the model can simulate the varying duty working characteristics of nuclear steam turbine plant accurately, and meets the needs of simulation analysis work on secondary system of nuclear power plant.

结果表明，该模型能准确模拟核汽轮机装置的变负荷运行特性，满足核动力二回路系统实时仿真分析要求。

Walsh function approach to optimal control and Simulation of linear time-varying system

用WALSH函数实现线性时变系统的最优控制和仿真

Numerical off-line simulation is carried out at different starting up conditions ( engine engaging speed, load torque and clutch LQR control parameters). The results are investigated and analyzed.

在不同的起步条件下（发动机起步转速、负载以及离合器LQR控制参数）对该模型进行了离线仿真分析，并与闭环控制策略的起步性能进行比较。

Optimization and Control Simulation of Hybrid Driven Tying Mechanism

基于混合驱动五杆机构的打结器优化设计与控制仿真

PSpice Simulation Analysis of Frequency Shifting in Sound Reinforcement System

扩声系统移频增音的PSpice仿真分析

Application of Computer Simulation in Design of Manufacturing Shop

计算机仿真在制造车间设计中的应用

Study on CAD and Processing Simulation System for Forming Spiral Groove of Screw and Formed Milling Cutter

螺杆铣刀数字化设计与加工仿真系统研究

Computer Simulation of Straw Rebound in Combining Machine

联合收获机拨禾轮谷物回弹问题的仿真试验

The Combined Error Doppler Ultrasound for Blood Flow Velocity Measurement and Its Simulation

超声多普勒血流测量的误差及其仿真研究

Quantitative Analysis and Simulation of Working Field of Locomotive Driver in Sitting Condition

机车乘务员坐姿作业空间的定量分析与仿真

Model Establishment and Simulation of Balanced Draft Air and Gas System for Circulating Double Fluidized Bed

循环双流化床锅炉平衡通风风烟系统建模与仿真

Numerical model for balanced draft air and gas system for circulating double fluidized bed is established and simulative study on the dynamic characteristics of air gas system is made.

建立了循环双流化床锅炉平衡通风风烟系统的数学模型，并对风烟系统的动态特性作了仿真研究。

This paper deals with the transient behavior of a three-phase induction motor operating with single-phase supply and using capacitor as phase balancer. On the Choice of Phase-balance Capacitance and Performance Calculation for Three-phase Induction Motors Fed from Single-phase Supply

对三相感应电动机由单相电源供电和用电容器作为相平衡器的瞬态行为进行仿真分析。三相感应电动机单相运行性能分析及电容选择

With the simulation results, we can draw that using a load balancing mechanism of cell sleep, can not only solve the problem of network load imbalance, but also greatly reduced energy consumption of the entire network.

经过仿真可以得出，采用了小区休眠的负载均衡算法，不仅能解决网络负载不平衡的问题，而且使得整个网络的能耗大为降低。

The Research of Solar Battery Farm Tricycle's Frame Construction Analysis and Optimization

太阳能电动三轮车车架结构性能仿真分析及优化研究