余的例句大全

The traditional dry load which is attached to the end of accelerator tube by using output coupler is the major bottleneck of the miniaturization.

微波剩余功率吸收负载是加速器必不可少的组成部分，传统的通过输出耦合器连接于加速管末端的干负载是使高功率直线加速器小型化的主要瓶颈。

More than one thousand kinds of organic pollutants are found in drinking water. This paper gave a review on the carcinogenic risk, health hazard assessment and detecting methods of organic pollutants in water.

饮用水中发现的有机污染物达1000余种，介绍了水中有机污染物的致癌危险性、健康危害评价及其检测方法。

However, TiO_2 is surplus at each temperature in coke bed condition, and the content of TiN is increased gradually with the rising of treating temperature.

而在埋炭气氛中，各个温度点下均有TiO2剩余，且随着处理温度的升高，产物中TiN的含量逐渐增加。

After removal of four points with discrete tendency, monitoring data is divided into six types, among which 2/ 3 is selected as learning sample and the rest as check sample.

最后运用聚类分析法、主成分分析法去除了监测数据中有离群趋势的4个点，将监测数据分为6类，从每类中选取2/3作为学习样本，其余数据作为检验样本。

Lastly, the methods of software redundancy, setting present output state register unit, and setting self checking program to solve the problem of control state being out of order.

对于控制状态失常问题采用软件冗余、设置当前输出状态寄存单元和设置自检程序等对策。

Network driver is divided into three sections including data transmission of network card, switch of network card and error checking in order to achieve the function of network redundancy.

为了实现网络冗余的功能将网络驱动程序分为网卡数据传输模块、切换模块以及故障检测模块。

Through analysis on mask defect and characteristic of laser, a method of laser gasification repairing superabundance chrome in mask is proposed. Based on the principle of the laser gasification and characteristic of LMT laser repair system, the LMT laser repair system is improved.

通过对掩模缺陷和激光特点的分析，提出用激光气化法修整掩模缺陷中多余铬缺陷的技术，对LMT型激光修版机进行了改进。

This article select he listed data of companies which make the reform in 2005 and 2006, break the date into two samples, using the Jones models to perform a regression analysis on the existence of earnings management.

本文选取05和06年进行了股权分置改革的上市公司数据，按年份将其分为两个样本，运用修正的Jones模型对盈余管理的存在性进行回归分析。

The region has been hit by scores of aftershocks, keeping people there on edge.

此后该地区又连续受到几十次余震的袭击，当地群众精神万分紧张。

These business savings surpluses are running at about 6 per cent of gross domestic product in the US and 3 per cent in the UK.

在美国，公司储蓄盈余大约占国内生产总值（GDP）的6%，而英国则为3%。

Implementation of Raised-Cosine Roll-Off Pulse Shaping Interpolated Filter Based on FPGA

升余弦滚降基带成型内插滤波器的FPGA实现

It is found that selecting appropriate value of duty cycles of Gauss light pulse signal, frequency chirp and the roll-off factor of raised cosine pulse signal produced by the equalizer of an optical receiver can improve the sensitivity of the optical receiver.

发现适当选取高斯光脉冲信号的占空比、啁啾分量、光接收机均衡滤波器输出的升余弦频谱波形滚降因子的值可以提高光接收机灵敏度；

Simulation results show that compare to the rise cosine pulse, with the narrow main valve and the faster high frequency rolling and the better resisting of spectral spreading, the new type IJF code has better performance.

仿真结果表明：与传统的升余弦脉冲比较，新设计的IJF码型性能更加优越，表现为主瓣窄，高频滚降快，有效地抑制了频谱扩展。

The Generation of Cosine Pulse Signal with Four Phase Codes

余弦脉冲四相码信号及其产生

The software ANSYS/ LY-DYNA has been employed to analyze transient dynamic response of a thin-walled conical shell subjected to a cosine pulse loading. As a result, Von-mises stress fields of this shell at different time moments are obtained to test its dynamic strength.

运用有限元分析软件ANSYS/LS-DYNA对在余弦脉冲载荷作用下某圆锥薄壳体的瞬态动力响应过程进行分析，得出了不同时刻下壳体等效应力场的分布，考察了该壳体结构的动强度性能。

A Comparison Study Between Cosine Model and Circular Distribution Method Used in the Analysis of Disease Peak Period

余弦模型与园形分布方法在分析疾病高峰期应用中的比较

The emluator to imitate IBSD system is established by adopting cosine distribution.

根据基本的余弦分布规律，建立了模拟离子束溅射镀膜系统的仿真模型。

Coordinate Transformation Based on Direction Cosine Parameters between the Object Coordinate System and the Word Coordinate System

基于方向余弦参量的物坐标系与世界坐标系间的坐标变换

Algorithm of transfer vector for tool semidiameter compensation base on direction cosine

应用方向余弦的刀具半径补偿转接矢量算法

The angle displacement of tested body is confirmed with the method of direction cosine, the mathematical model of angle displacement is established.

以方向余弦法来确定被测体的角位移，建立其角位移数学模型。