公差的例句大全

Study on Dimensional Tolerance Inquiry and Label System of Plastic Mold Structural Part

塑料模具结构零件尺寸公差查询和标注系统的研制

Mathematical model of dimensional tolerance of straight line based on variation along DOF

基于自由度变动的直线尺寸公差数学模型

Firstly, the concepts of dimensional element ( DE) and dimensional element-chain ( DEC) are defined, and a geometric tolerancing model expressed by DE and its semantic mapping are also given.

首先定义尺素和尺素链等概念，并在此基础上建立尺寸公差的尺素表示模型及其语义映射；

In this study, a new classification method of tolerances according to semantics and mathematical representation of basic geometric elements based on DOF is given.

给出了基于语义的几何公差分类方法及基于自由度变动的基本几何要素数学表示方法；

In this PISTON-CAD/ CAM system, database, modular and group encode technology are used, when the construction, dimensions and tolerances of the piston are input by menu, the working drawing of piston is output.

PISTON－CAD／CAM系统，应用数据库、模块化及成组编码技术，用户通过屏幕菜单输入活塞结构、尺寸及公差以后，可输出活塞产品图；

Design, error analysis and simulation of the antenna are presented.

给出了天线各部分的设计 、 公差分析和仿真.

Drawing the mechanical engineering drawing usually need to mark the dimension tolerance of the parts.

绘制机械工程图经常要标注零件的尺寸公差.

Determination of the Machining Tolerance of Subsurface Pump Barrel Liners

抽油泵泵筒衬套加工公差的合理确定

Conversely, the seat line of the new ZHI and IRH seat geometires migrate away from the tip, allowing a reduction in tolerance limits but requiring sophisticated grinding and measuring technologies.

相反，允许降低公差范围但要求完善的磨削和测量技术的新型喷油嘴ZHI和IRH的密封线却慢慢远离针阀顶端。

The statistical calculation and judgement of size tolerance

尺寸公差的统计判断与计算

During the intermediate annealing, foil material rolling, the effective action has been taken to guarantee the size tolerance;

在中间热处理、箔材轧制等环节采取有效措施保证了尺寸公差；

Other special size tolerance may be satisfied on request.

特殊尺寸公差可由买卖双方协议。

An Investigation of Dimensional Tolerance of Castings in Several Investment Casting Factories Study of Conformance Test for Size Tolerance

若干熔模铸造工厂铸件尺寸公差实况调查分析

JSF Round-hole Pearlite Partition Plank

圆榫及孔公差探讨JSF珍珠岩圆孔隔墙板

The rabbet for install the outer must be H7 tolerance, ensure a high axiality.

工件机壁孔之公差必须为H7，保证内外环较高同轴度。

In mass production, where mating parts must be interchangeable, unilateral tolerances are customary.

在大规模生产中, 要求互相配合的零件时可互换的, 因此单向公差更合适.

The maximum permitted shot load in ISSF supervised competitions is 24 g plus 1 g tolerance.

国际射联监管的比赛中允许的为弹丸最大装填量为24克(允许1克的公差).

The point of actuation by gravity has not been investigated by the karabiner manufacturers and is subject to an unknown tolerance range.

岩钉钢环制造商对重力作用点一直未作研究，重力作用点取决于未知的公差范围。

Experiments with FCG show that voltage breakdown and fabrication tolerance causes most of the flux losses.

从FCG装置的实验中得到了FCG设计中存在的主要问题是击穿和装配公差。

According to the tolerance maths model and performance demand, the program make a compromise of the reliability and economy for the machine.

根据公差数学模型与使用要求，该程序综合考虑并实现了机器零件的可靠性和经济性。