内的例句大全

The remain life time of the combustion engine depends on the wear extent of the cylinder liner, piston, crank bearing and crank principal bearing of the combustion engine.

内燃机使用寿命主要取决于缸套、活塞、曲轴轴承等主要磨损件的磨损程度。

Development of Crank Angle 'Window' Controller for IC Engine

内燃机曲轴转角窗口控制器的研制

It also features a built-in hand crank that allows for manual operation when power is unavailable.

内置的手摇曲柄允许消磁器在电力无法供应时手动操作。

It consists of four main parts: external gear, internal gear, control board and crank.

该装置由内齿轮、外齿轮、控制板及曲轴四个主要零件组成。

On parametric feature lib of internal combustion engine crank gear

内燃机曲柄连杆机构参数化特征库研究

The Influence of Parametric Deviation of Crank Gear On Dynamic Balancing Quality or Internal Combustion Engines

曲柄连杆机构参数偏差对内燃机动力平衡性能的影响

Study on the Tribological Behavior of Bushing-Crank Journal Rubbing Pair of Engine

内燃机轴瓦-曲轴轴颈摩擦副摩擦学性能研究

Engine crankshaft front, rear oil seal on the sealing function of crankshaft rotation, which guarantees good lubrication of the engine cylinder body, reduce friction power loss.

发动机依靠曲轴前、后油封实现对曲轴旋转运动的密封功能，保证了发动机缸体内有良好的润滑，减低摩擦产生的功率损耗。

Equilibrium analysis on crankshaft's rotation inertia force of internal combustion engines

内燃机旋转惯性力的平衡分析

A drive system for an internal combustion engine including an endless chain connecting a drive sprocket on a crankshaft to a driven sprocket on a camshaft.

一种用于内燃机的驱动系统，包括将曲轴上的主动链轮连接到凸轮轴上的从动链轮的一条环链。

Research For Improvement on Crankshaft Bearing Lubrication of IC Engine

改善内燃机曲轴轴承润滑状态的研究

Numerical Research on Friction Properties of Crankshaft Bearing in an Internal-Combustion Engine

内燃机曲柄滑动轴承摩擦性能的数值研究

Study on the Influences of Some Parameters on the Lubrication Properties of Crankshaft Bearing

若干参数对内燃机曲柄滑动轴承润滑特性的影响

Coat the sealing ring inside and out with fresh engine oil and pre-position it on the crankshaft flange.

用新鲜机油涂抹密封圈内外侧，并预先放在曲轴法兰上。

During the curing reaction, ester groups were intramolecularly transferred from the esterified phenol novolac resin to the o-cresol novolac epoxy resin.

结果表明，在促进剂2甲基咪唑存在下活性酯固化邻甲酚环氧树脂的反应是通过分子内机理进行的。

The Relation between the Incidence and Treatment of Periodontal Disease and the Proportion of Various Species of Bacteria in the Gingival Crevice and Periodontal Pocket

龈沟和袋内各种细菌的比例与牙周发病、治疗的关系

Croton oil ( 10% of concentration) was administered by gastric tube.

经胃管向胃内注入10%巴豆油。

The only high-tech enterprise producing quartz crucible of the maximum diameter and enterprises short-listed in the National Golden Sun Project are in our economic zone.

拥有国内唯一生产最大直径石英坩埚的高新技术企业及国家金太阳工程入围企业。

The precursor solution was then condensed in porcelain crucible at 90 ℃ and was decomposed rapidly at 500 ℃ followed by a heat treatment at 500 ℃ for 1h.

最后在电炉内500℃的条件下分解，之后热处理1小时。

By analyzing and computing the force of big rib of bearing and the force of cone and cup raceway, the contact stress between the tapered roller and bearing raceway is computed and the form of crowned roller is selected;

通过分析计算轴承的大挡边以及内、外滚道的受力，计算滚子和轴承滚道间的接触应力，进行滚子凸度选形；