凹的例句大全

Sudi Division is located at the south part of center anticlinal zone.

苏堤地区位于西湖凹陷浙东中央背斜带的南部，现有钻井天外天一井揭露平湖组1549.5米。

Axial aponeurotic flap combined with skin graft in the treatment of lower lid ectropion and severe infra orbital soft tissue depression

轴型筋膜瓣加植皮修复下睑外翻及眶下组织重度凹陷

An empirical Green function approach with asperity model considered

考虑凹凸体理论的经验格林函数方法

The conditions oil accumulation is Liuxi Area of Raoyang Depression are analyzed.

分析了饶阳凹陷留西地区的成藏条件.

The conditions for oil accumulation is Liuxi Area of Raoyang Depression are analyzed.

摘要分析了饶阳凹陷留西地区的成藏条件.

The walls in my photo felt like melted iron, hot and red, smeared onto the walls in curves and cambers.

照片上的岩壁，在我的感觉就像热和红色的铁水，涂抹到凹凸砍削的石壁。

The axial lower section of the hemisphere case is equipped with the absorption cavity which connects with the segmental concave cavity.

半球壳体轴向下部设有连通圆缺凹腔的吸收腔。

The V shaped deepening of audiogram in pilots and ground crew was at 6000 Hz.

飞行员和地勤人员高频听力损失的V型凹陷在6000Hz。

She was tall , with a high, sad face sunken a little where her teeth were missing.

她身材高大, 脸上带着茫然忧伤的神色,牙齿落掉的部位略微凹陷.

With turning, the alignment error of concave sphere center and axis of rotation makes optical path difference alter, so interference fringes will change from bright to hidden.

凹球面支撑轴旋转时，球心与旋转轴线的对准误差导致两反射光光程差变化，使干涉条纹移动。

Amendment 2-Luminaires-Part 2-22 : Particular requirements-Luminaires emergency lighting.

修改件2.灯具.第2-22部分: 凹槽式灯具的特殊要求.

Back up roller : Roller which backs up the impression roller for additional pressure in gravure printing.

加压辘: 在照相凹版印刷机上,给予压力圆筒额外压力的辊辘.

It will affect the elastic of the film better if we add a recess. See how it will affect the assembly parts, and then make your decision.

此处加一个凹槽，胶片的弹出效果会更好一些，试模后看装配的效果再做修正。

Minerals in atmospheric dusts are mainly derived from soils, building dusts and dusts in some areas.

大气粉尘中的矿物主要来源于土壤尘 、 建筑工地和局地扬尘,颗粒较小,一般呈不规则形状,表面凹凸不平.

It is questioned that thickness curves of concrete structures having uneven surface are directly derived without migrate, and depth is taken directly from ordinate in arithmetic progression.

常见的不作偏移，即对其背后岩石凹凸不平的混凝土结构物作厚度曲线，或在时间剖面上用等差级数的深度纵坐标，有基本概念的问题。

The reservoir lithology of oil bearing Huagang formation on Sudi structural belt in Xihu depression is mainly lithic arkose, feldspathic litharenite and feldspathic quartzitic sandstone.

西湖凹陷苏堤构造带花港组油层储集岩主要为岩屑长石砂岩、长石岩屑砂岩、长石石英砂岩，岩屑含量较少，岩石成分成熟度和结构成熟度均较高。

In the manufacture makes the concave-convex modelling generally in surface of wood surface, outside sprays paint.

制作中一般在实木表面做凹凸造型, 外喷漆.

And the concave-convex deformation of grains surface occurred in the early stage of fatigue in copper.

疲劳初期,纯铜试样表面还出现晶粒的弹性凹凸变形.

Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.

指示凹焊缝 、 凸焊缝或平焊. 增加高度以配合其他焊接符号.

Propagation of an aseismic dislocation through asperities with smooth borders

穿过具有平滑边界凹凸体的无震位错的传播