刃的例句大全

If you try to cut stone with a knife, you will blunt the edge.

如果你试以刀砍石，你就会把刀刃弄钝。

Wear resistance improves as cutting tool hardness increases.

削刃口耐磨，易磨损。削硬越，耐磨性越。

The result is that cutting forces and veneer quality are affected by veneer thickness and oblique angles of cutting edge.

实验结果表明单板厚度、刃倾角对切削力和质量分别有不同的影响。

In the 0-90 cutting condition, the main cutting force and vertical component force are increased with the increasing veneer thickness and decreased with the increasing oblique angles of cutting edge for both species.

横向切削时主切削力和垂直分力基本都随单板厚度增加而增大，随刃倾角增加而下降。

Study on Deformation of Oblique Cutting with Large Cutting Edge Inclination Angle

大刃倾角切削的变形研究

Calculation of Side Cutting Edge Angle of Gear Shaping Cutter

插齿刀侧刃切削角度的计算

This paper introduced the machining properties of PCD tool in cutting out Al2O3 laminated flooring, and made a study on the configuration of tools, the material 0f cutting edge, the engagement angle of the tools and the machining parameters.

本文介绍了切削Al2O3强化木地极的加工特点，研究了金刚石刀具的结构、切削刃材料、几何角度及切削参数等。

This article focused on drilling in the actual processing of microporous main cutting edge of micro-drill breaks and microporous processing accuracy.

集中论述了在实际微孔钻削加工过程中主切削刃对微钻头折断和微孔加工精度的影响。

The apparatus and method for testing the thrust and torque on the main cutting edge and chisel edge of drill point was introduced.

通过试验测试了任意形状钻头切削刃的轴向力和扭矩，为钻头受力预测提供了一套完整的研究方法。

In many cases of stainless steel cutting operations with carbide tools, a tool life strongly depends on flank notch wear of depth of cut rather than average flank wear of main cutting edge.

硬质合金刀具在不锈钢加工中，其刀具耐用度主要是取决于后刀面边界磨损而不是主切削刃后刀面的平均磨损量。

The settle time is related to the angle of harrow leaf and harrow blade and principal axis speed of drier.

物料在小干燥盘上的停留时间与耙叶和耙刃的角度以及干燥机主轴的转速有关。

Carbide cutter Failure Analysis of Cemented Carbide Forming Tool in Grinding Process

硬质合金成型刀具刃磨加工失效分析

Research on the edge curve of assembly type formed milling cutter

装配式成形铣刀刀刃曲线研究

CNC Grinding Method of Formed Turning Cutter for Rollers by Using Floating Polar Coordinate

轧辊成形车刀的浮动极坐标数控刃磨方法

The problem of designing an assembly type formed milling cutter is how to design the edge curve.

而铣刀刀刃曲线设计正是装配式成形铣刀设计的技术难点。

Let your music, like a sword, pierce the noise of the market to its heart.

让你的音乐如一柄利刃, 直刺入市井喧扰的心中吧.

The problems of the Middle East will hardly be solved overnight.

中东问题也不可能一夜之间迎刃而解.

Once the principal contradiction is grasped, all problems can be readily solved.

抓住了主要矛盾, 一切问题就可以迎刃而解.

They could both talk the problem and solve it.

他们俩谈谈那个问题,然后就迎刃而解了.

An acute word cuts deep than a sharp weapon.

恶语伤人胜过利刃.