压力的例句大全

The results show that the pressure effectively enhances the NX → NN1 thermally assisted exciton transfer processes.

结果表明，压力效应明显地加强了N x→NN1的热助能量转移过程。

Conclusions: The traditional Chinese medicine extracting machine is efficacious on the temperature of 115 ℃ and under the pressure of 0.7 kg · cm-2. The decoction validness is high. It is suitable for clinical use.

结论：中药煎药机在115℃，0.7kg·cm-2压力下煎煮效果好，煎出率高，适合临床用药。

Numerical simulation and experiment results showed that the spray slurry has obviously integration effect on the flue gas with combination of pressure-swirl-atomizer and flat fan atomizer nozzle, they could prevent gas collision and avoid entrainment.

数值模拟与实验结果表明：压力旋转和扇形喷嘴组合条件下，浆液喷淋对烟气具有明显的整合作用，防止气体撞击，避免了雾沫夹带现象。

Die casting is a metal forming method with high production efficiency, high production quality and high precision.

压力铸造是一种生产效率高，产品质量高、精度高的金属成型铸造方法。

The influences of temperature, pressure and cosolvent on the melting behavior of BAPC treated by supercritical CO2 were studied by DSC and WAXD.

采用DSC，WAXD研究了在超临界CO2作用下，温度、压力和共溶剂对双酚A型聚碳酸酯（BAPC）的结晶和熔融行为的影响。

Objectives To evaluate the clinical applications of bilevel positive airway ventilation ( BiPAP) ventilation in the older patients with acute cardiogenic pulmonary edema ( ACPE).

目的观察应用双水平压力支持呼吸机（bilevelpositiveairwayventilation，BiPAP）无创通气治疗老年急性心源性肺水肿的临床价值。

Conclusions: Vertebroplasty injection of 2 to 4ml ACPC can restore vertebral mechanical property and bring about little leakage.

结论2～4ml ACPC能恢复椎体的抗压力学性能，渗漏较少。该剂量比较适宜于胸腰段脊柱ACPC椎体成形术。

It is often the case, though, under time pressure, that simple Singletons make it easy to bridge large gaps between components.

尽管在时间压力下，通常情况是用简单的单件来连接各种各样的组件比较容易。

The hydration products and microstructure of Class G oil_well cement and YLD sealant pastes cured under the conditions of the simulated temperature and pressure at the bottom of oil_well were investigated with XRD, TG and SEM-EDS.

采用XRD，TG和SEM-EDS等研究了在模拟油井深处温度、压力条件下养护的G级油井水泥和YLD型堵漏剂浆体的水化产物和显微结构。

Analysis and Check on the Design Pressure of the Tube Body of WHF Lined Case Reaction Kettle

WHF型夹套反应釜筒体设计压力分析和校核

QCS-01 is one of Co-Mo oxide-based WGS reaction catalysts which can operate under high pressure up to 9 MPa.

其中QCS-01型催化剂可用于高达9.0MPa压力的变换反应系统。

WBT examination technology of double packers with monitoring by pressure gauge

压力计辅助双封隔器验窜技术

WPT consists of two main programs: stress and record.

WPT包括两个主要程序：压力和记录。

A New Technology of Viscous Pressure Forming ( VPF) of Sheet Parts

板件粘性介质压力成形新工艺

Research on Viscous Pressure Forming ( VPF) of Aluminum Alloy Ladder Parts

铝合金阶梯形件粘性介质压力成形的研究

Viscous pressure forming ( VPF), a recently developed process, is an advanced approach in sheet metal forming.

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。

Conclusion There were abnormal urethral closure function and abnormal mobility of UVJ in SUI group.

结论压力性尿失禁组同时存在尿道关闭功能和连接部移动度异常。

Liquid distribution curves of ERI and BL gas/ liquid distributor are gentle as well. As for pressure drop, ERI gas/ liquid distributor is the lowest, UOC is intermediary, and BL is higher;

ERI型和BL型气液分配器的液体分配曲线平缓，在压力降方面ERI型最低、UOC型居中、BL型较高；

Tne degree temperature distribution asymmetry of ERI and BL quench box are both lower than that asymmetry of UOC quench box. Pressure drop of ERI quench box is the lowest, UOC is intermediary, and BL is the highest.

ERI型和BL型急冷箱的温度分布不均度均比UOC型的低，在压力降方面ERI型最低，UOC型居中，BL型最高。

Methods 37 patients with stress incontinence underwent the TVT procedure.

方法采用TVT术式治疗女性压力性尿失禁患者37例。