厚度的例句大全

Increasing the thickness of plastic bags has been found to have a positive impact on littering.

增加塑料袋的厚度已经被证实对其废弃有正面的影响.

The sediment thickness and lithology are variable.

富县组沉积厚度变化大,岩性差异明显,岩相复杂.

The reliability optimization design method of the multi leaf spring with different thickness is discussed.

介绍了车辆不同厚度钢板弹簧的可靠性优化设计方法.

But veneer peeling thickness of log-core veneer lathes are not easy to guarantee.

但无卡轴旋切机的单板旋切厚度不易保证.

Used for measuring the thickness and optical constants of transparent or semi-transparent single film or multilayer.

单层 或多层薄膜的厚度和光学常数的测定.

Coating material can be saved because of the thinness of the monolayer.

因为该单分子层的厚度可以节省涂覆材料.

The thickness of the steel plate handled by this roller mill ( shear machine ) is 25 millimeters.

这台滚压机 ( 剪切机 ) 加工的钢板厚度可达25毫米.

Thickness of mild steel shall be adequate and shall not be less than 2.5 mm.

低碳钢的喷绘的厚度应该适当,并不得少于2.5毫米.

Arange of mild steel thickness up to 6 mm can be easily punched.

并能轻易地冲压各种厚度达6毫米的软钢.

Measure the painting thickness from the image that is suitably magnified by microscope.

从被显微镜适当放大的图像中可以测量镀层检测仪的厚度.

The thickness of lubricating film in micron level was feedback controlled by adopting PID control arithmetic.

采用PID控制算法对微米级的润滑膜厚度进行反馈控制.

Micrometer on instrument used to measure thickness.

千分尺—用来测量厚度的工具.

Foam slag with good metallurgic performance and enough thickness can be got by several operating measures.

控制好几个操作参数,能得到冶金性能良好,渣层厚度足够的泡沫渣.

The heavy gauge steel construction industry has maximized their profit.

大厚度钢材建筑业已将其利润最大化.

Measurements of ice thickness and seabed topography under the Fimbul Ice Shelf , Dronning Maud Land, Antarctica.

南极洲的DronningMaud陆地Fimbul冰架下冰厚度和海床地形的测量.

It a thickness of only 0.3 mm materiality, antishrinking polypropylene is lenslet ledrel tsal qipanshan-shueef regular order.

它的厚度仅为0.3mm, 所用材料是聚丙烯,缩微透镜如同棋盘状有规则地排列.

Aligning by light , helful to mark out by hand for shearing.

刀片间隙快速调整机构,可根据被剪板料厚度按指示标牌进行调整.

Remark: The Diameter, bore, Thickness, Teeth NO. and surface also can be made to order.

注意: 可根据客户的需要定做所需外径 、 内孔 、 厚度 、 齿数及外表的不同处理,网上图片仅供参考.

It is noteworthy that in plastic film and foil, bearing in mind that prevent media thickness.

不值得夺目的是在塑料薄膜和铝箔洋, 给夺目避免厚度的保持.

Therefore, the thickness of relative to normalcy.

故不能单纯以其厚度作为衡量是否正常的标准.