合金的例句大全

The change in strength of cryogenic austenitic steel with temperature and alloying element content was studied.

研究了低温奥氏体钢的强度随温度及合金元素含量的变化规律.

Al Pb binary monotectic alloys were prepared using the rapidly solidified gas atomization technology.

采用雾化快速凝固技术制备了Al?Pb二元偏晶合金.

Variety and quality of ferroalloys in application to welding material have been introduced in this paper.

简要介绍了焊接材料使用的铁合金种类与质量要求.

Fulltai is a-tech company which focuses on developing and manufacturing Ni-Ti shape memory alloy medical appliance.

福泰医疗是集开发,生产,销售钛镍记忆合金医疗器械为一体的 高新技术 企业.

Adopt 304 stainless steel and alloy which is deal ed with anodic oxidation.

全机采用304不锈钢和经阳极氧化之铝合金材料.

Adopt 304 stainless steel and alloy which is deal ed with anodic oxidation except the shelf.

除机架外,全机采用304不锈钢和经阳极氧化之铝合金材料.

It was found that when a moderate amount of crystalline α-Fe ( Si) phase precipitates, the induced magnetic anisotropy forms, of which the easy magnetization direction is perpendicular to the alloy ribbon surface.

实验发现：当合金内有适当数量的-αFe（Si）晶体相析出时，可形成感生磁各向异性，易磁化方向与带面垂直。

The study shows that the alloys under stress annealing can obtain transversal induced magnetic anisotropy.

研究发现，在应力退火下两种合金都获得了横向感生磁各向异性；

The core loss spectrum P ( f) of magnetic alloy with constant permeability has been studied. It is found that P ( f) has the fractal structure. The effect of the induced anisotropy energy Ku on the fractal dimension Df is discussed.

研究了恒导磁合金的铁芯损耗谱P（f），发现P（f）具有分形结构，讨论了感生各向异性能Ku对分形维数Df的影响。

The induced variation of anisotropy of the alloys on the process of isothermal annealing at 260& 280 ℃ was measured in a rotating magnetic field with different speeds.

用磁转矩方法测定了在不同旋转速率的磁场作用下合金中感生磁各向异性在等温退火（260&280℃）过程中的变化。

The results show that the ECP of the annealed copper alloys for lead frames can be predicted by the model.

结果表明，在试验范围内，模糊控制对引线框架铜合金时效后导电性能的预测是可行的。

When the aluminum content increases, the grain size of cold-rolled annealed panel becomes small, but the hardness, yield strength and tensile strength of stainless steel 439 increase.

随着439不锈钢合金成分中铝含量的增加，冷轧退火板的晶粒尺寸较小，硬度、屈服强度和抗拉强度升高。

As the pearlite in it contains cementite phase and has high crystal boundary density, the nucleation and growth of deposits prefer to occur at the pearlite at the beginning during deposition on the surface of annealed 45 steel.

在退火态45钢表面，Ni-P合金镀层优先在晶界及渗碳体表面形核.由于珠光体组织中含有渗碳体相且具有比较高的晶界密度，因而在沉积初期镀层优先形核和生长。

The martensitic transformation of retained austenite particles in an intercritically annealed low-alloy steel has been studied using the acoustic emission technique.

用声发射法研究了一种低合金钢于双相区热处理所得残余奥氏体的马氏体相变。

Bright Annealing of Copper and Brass Strip

铜及铜合金带材的光亮退火

Titanium alloys are widely used in aerospace industry due to their excellent mechanical properties.

钛合金是航空航天工业中应用广泛的一种难加工材料.

The temperature of the joint should be hot enough to melt the brazing alloy.

连接部位的温度应该高到能够融化铜焊合金.

When joint is filled, a continuous run of solder or brazing alloy will be visible.

在安装连接部件时, 可以看到焊料和钎焊合金继续流动.

However the laser cladding of iron-based alloy brings some problemsas crack, oxidation , burning loss, hole.

工艺的选择等方面着手解决了铁基合金的激光熔覆中存在的容易开裂 、 容易氧化 、 容易产生气孔等问题.

Commonly used materials: titanium, titanium alloy, stainless steel, iron, aluminum, copper, beryllium copper.

常用材料: 钛 、 钛合金 、 不锈钢 、 铁 、 铝 、 铜 、 铍铜等.