合金的例句大全

The item of lot 2247 is made of Alloy metal.

第2247号拍品材质应为合金镀银.

Fracture of needle-shaped eutectic silicon in Si-Al alloy processed by equal channel angular extrusion

等通道转角挤压硅铝合金针状共晶硅损伤断裂实验

With signal processed by computer, the glueyness of an aluminium alloy bicycle frame is investigaed experimentally and theoretically about whether the vibration monitoring technique is feasible.

本文应用电子计算机和振动信号分析处理技术，从理论和试验两方面研究了铝合金自行车车架胶接质量振动检测的可能性。

The Extrusion Dies CAD System Development of Light Alloy Wainscot with Flange based on VB 6.0

基于VB6.0的轻合金带筋壁板挤压模具CAD系统开发

The effects of hydrogen on the activation energy and the kinetics of glass transition and crystallization of Zr-Ti-Cu-Ni-Be bulk amorphous alloy were studied by differential scanning calorimetry ( DSC) and the Kissinger equation.

利用非等温差热扫描量热分析方法及Kissinger方程，研究了H原子对Zr-Ti-Cu-Ni-Be块状非晶合金玻璃转变和晶化的激活能影响。

Finally, the successful superplastic gas pressure bulging forming experiment superplastic forming capability of the alloy.

通过胀形实验可以看出,该镁合金板材的超塑成形性能好,具有良好的超塑性成形应用潜力.

The trace element Rh exists mainly in native platinum, platinum-iron alloy and Pt-containing osmiridium.

主要矿物是自然铂矿、铁铂合金、钌铱锇矿、等轴锇铱矿和铱锇矿。

Atmospheric corrosion behavior of two high strength aluminum alloys with aluminum overlayer under strain

两种包铝的高强铝合金受力状态下的大气腐蚀行为

The cutting technology of alloy is interesting for technicians, who engage in machine manufacture.

钛合金材料的切削加工, 历年是从事机械制造的技术人员感兴趣的问题.

Shear band in overaged al-2. 45wt% cu alloy polycrystal

铝铜合金过时效多晶体中的剪切带

The results indicate that on the condition of peak aging, the materials show higher resistant to creep than those overaged materials do.

结果发现：峰时效下，合金的蠕变抗力强于过时效状态下材料的蠕变抗力。

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象：第二相颗粒的回溶，合金基体重新形成过饱和固溶体。

Therefore, it is interest to investigate residual stresses in aircraft aluminum parts.

因此, 研究航空铝合金构件中的淬火残余应力就显得非常重要.

Hot tapping of internal thread of titanium alloy single-side threaded self-plugging rivet

钛合金单面螺纹抽钉内螺纹热攻丝

The torch body shall be made from nickel chrome plated heavy guage brass.

手电筒主体需镍铬合金电镀,且需带有明显的铜质进度指示(线规).

The alloy was added to the mixture to make it worth less on the market.

通过降低成色而使合金的市场价值降低.

The two rubber barrels of it use independent sealing to prevent slip from rusting and fouling.

接纳双胶筒独立弥缝,有用防止卡瓦,生锈、结垢.卡瓦选用合金质料加工.

Q series of bevellers are hydraulic pressure drove, equipped with hard alloy cutter.

系列倒棱机床,采用液压自定心夹紧,液压可转位挡料器挡料,硬质合金刀切削.

Soldering of copper, copper alloys and galvanized iron plain sheet.

铜及铜合金、镀锌铁皮的钎焊.

The newest working style to combine the alloy metal and carbon.

业界首创超薄铝合金加碳纤维之折叠车.