合金的例句大全

The effect of proportional overload on the low cycle tension-tension fatigue life of aluminium alloy plate with circular hole

比例超载对铝合金圆孔薄板试件低周拉-拉疲劳寿命的影响

The running tests of the alloy coatings on the blade of hydraulic turbine produced using oxy-acetylene spray welding procedure manifested that the average service life of many different hydraulic turbine obtained a lot improvement after spray welding.

应用氧乙炔喷焊工艺在水轮机叶片上制备合金涂层，经过数台机组多年的实际运行，表明该材料抗磨蚀性能优异，喷焊后的水轮机叶片的平均使用寿命得到大幅度提高。

Study on surface pretreatment of titanium alloy adherend

钛合金粘接件表面技术研究

Technology of Liquid Die Forging for Adjustable Spanner Bodies

铝合金活扳手扳体液态模锻工艺

Study of the Superficial Pottery and Porcelain Technology in Aluminum and Aluminum Alloy Board Material

铝及铝合金板材表面陶瓷化工艺的研究

The supersonic gas-centrifugal atomization Technology was used to study the influence of distinctive factors on the properties of AgRE alloy powders.

采用超音速气体离心雾化技术，研究了不同工艺条件对银稀土合金粉末性能的影响。

Effect of Supersonic Gas-centrifugal Atomization Technology on the Properties of AgRE Alloy Powders

超音速气体离心雾化工艺参数对银稀土合金粉末性能的影响

Its high-tech products "Alcan Alloy Cable" had been successfully operated for over thirty years in North America.

其高科技产品加铝合金电缆在北美已经成功运营了三十多年历史，在北美的市场份额约占50%。

Calculation of Melting Point and Allotropic Transformation Temperature of Ti-Al Alloys with Interstitial Impurities

含间隙元素Ti-Al合金的熔点及同素异型转变温度计算

The Alterative of Research and Development of Al-Si Alloy

铸造Al-Si合金变质剂的研究现状和发展动态

The Morphologies of TiAl_3 in AlTi Master Alloys and Their Effect on Refinement Efficiency

AlTi中间合金中TiAl3形态及对细化效果的影响

Discussion of casting and rolling process to make 3004 aluminium alloy strip plate

铸轧法生产3004铝合金带坯工艺探讨

It is very difficult to determine the mechanical properties in different narrow areas of weld joint of aluminium alloy plate using conventional test.

采用常规试验方法来测定铝合金型材构件焊接接头各区的力学性能及其变化规律是很困难的。

Calculation of Laser Amorphism Cooling Rate on Pd-Cu-Si Alloys Surface

钯-铜-硅合金表面激光非晶化冷却速率的计算

Wear Resistance Tests of Hard Anodic Coating on Aluminum Alloys

铝合金硬阳极化膜的耐磨试验

Tin-zinc alloy deposit is anodic coating to iron and steel.

锡锌合金镀层相对于钢铁基体为阳极性镀层。

The Chromaticity of Electrolytic Colouring Anodic Coating of Aluminium and Its Alloys

铝及铝合金电解着色膜的色度研究

Adsorption behaviour of anisic aldehyde. tetren and ZN-A5 additive as well as their inhibition effects on the electrodeposition process have been discussed.

提出了碱性电镀光亮锌镍合金的最佳镀液组成和工艺规范，并对茴香醛、四乙烯五胺和ZN&A5添加剂的吸附行为及其对锌镍电沉积过程的阻化作用进行了探讨。

Anelastic relaxation, cyclic creep and stress rupture of particle strengthened Superalloys

粒子强化高温合金的滞弹性松弛、循环蠕变和应力断裂行为

E development condition, manufacture technology and properties in high temperature of nickel andiron based oxide dispersion strengthened alloys is reported.

扼要阐述了铁、镍基二类氧化物弥散强化合金的发展状况、加工工艺、高温性能及其应用前景。