合金的例句大全

Practical Azole Corrosion Inhibitors for Copper and Its alloys

铜及其合金的实用唑类缓蚀剂

A Novel Restore Method for Alloy Copper Sliding Axletree Used in Steam Engine

蒸汽机车连杆铜合金滑动轴承修复装置

High-performance amorphous-sillicon alloy PIN active-matrix LCD for military and avionic applications

用于军事和航空电子学的高性能非晶硅合金PIN有源矩阵液晶显示器

The ammonia or ammonium caused the surface embrittlement of copper alloys during corrosive wear.

氨或铵离子对铜合金腐蚀磨损的加速作用与腐蚀磨损过程中的氨致脆性有关.

The Analysis and Mathematical Model of Atomizing Solidification of Alloy Droplet

合金液滴雾化凝固过程分析与计算模型

The effects of atomizing technology factors to the properties of the spray welding alloy powder

雾化工艺因素对喷焊合金粉末性能的影响

Im this paper , bascd on analysis of the problems in pouring babbitt metal.

笔者根据该件在浇注巴氏合金过程中存在的问题, 改进了胎模结构,采取了文中所述的工艺措施.

Studies were made for the effect of alloy composition and water atomisation on high chromium iron powder for plasma transferred arc surfacing.

本文对等离子喷焊用高铬铸铁粉末的合金成分和水雾化制粉工艺进行探讨。

Highest reducing potential at lowest cost is achieved by optimizing alloy design and processing parameters.

通过优化合金设计和工艺参数实现了以最低成本生产最轻的产品。

Hard Facing is weld deposited Cobalt base alloy.

硬面焊接钴基合金沉淀物.

The titanium-aluminium alloy is characterized by light weight, high temperature strength and wearing resistance.

钛铝合金具有质量轻 、 高温强度和抗磨性能良好等特征.

A power cutoff saw with carbide blade is recommended for high volume cutting.

如果切割量很大,建议采用带硬质合金刀片的电动切割锯.

According to Lira and Ashby's method and referring to the results of researches relevant to Cu and Cu-alloy, the mechanism diagram of wearing of these materials is obtained.

本文依照Lim和Ashby处理方法，参阅有关铜和铜基合金的研究成果，得到了这类材料的磨损机理图。

Effect of artificial ageing on fatigue behaviour of 2524 aluminum alloy

高温短时人工时效对2524合金疲劳性能的影响

AA6016 aluminum alloy Automotive panel Bake hardening Artificial ageing Process parameter;

AA6016铝合金；车身板；烘烤硬化；人工时效；工艺参数；

Moreover, after extruding the alloys can improve their plasticity if artificial ageing is processed.

挤压后直接人工时效，可有效地提高合金的塑性。

Effects of artificial ageing on the hardness distributions and strength were analyzed for6063 aluminum alloy joints welded by varying heat inputs.

对不同焊接热输入下的6063铝合金焊接接头进行人工时效，分析其硬度分布和强度的变化。

Micro-hardness test and XRD spectra indicate that artificial ageing treatment at low temperature can further improve the mechanical property of the solid solution strengthening aluminum alloy after ECAP process.

显微硬度以及XRD测试结果显示低温时效处理进一步提高了强化固溶态高强铝合金ECAP加工后的机械力学性能。

, and YS ( yield strength) and the value of YS/ UTS increase through the followed artificial ageing with obvious loss of elongation.

而其后的人工时效处理能明显提高合金的屈服强度和屈强比，但也明显降低了延伸率。

In the paper, the results of experiment are provided, the micro-mechanisms of both natural and artificial ageing are studied, and a new way to improve the mechanical properties of zinc-containing alloys is proposed.

文内提供了实验结果，并对自然时效和人工时效的机制进行了研究，为提高锌基合金型材的力学性能开拓一条新途径。