合金的例句大全

The effect of proportional overload on the low cycle tension-tension fatigue life of aluminium alloy plate with circular hole

比例超载对铝合金圆孔薄板试件低周拉-拉疲劳寿命的影响

It is very difficult to determine the mechanical properties in different narrow areas of weld joint of aluminium alloy plate using conventional test.

采用常规试验方法来测定铝合金型材构件焊接接头各区的力学性能及其变化规律是很困难的。

Discussion of casting and rolling process to make 3004 aluminium alloy strip plate

铸轧法生产3004铝合金带坯工艺探讨

The Morphologies of TiAl_3 in AlTi Master Alloys and Their Effect on Refinement Efficiency

AlTi中间合金中TiAl3形态及对细化效果的影响

The Alterative of Research and Development of Al-Si Alloy

铸造Al-Si合金变质剂的研究现状和发展动态

Calculation of Melting Point and Allotropic Transformation Temperature of Ti-Al Alloys with Interstitial Impurities

含间隙元素Ti-Al合金的熔点及同素异型转变温度计算

Its high-tech products "Alcan Alloy Cable" had been successfully operated for over thirty years in North America.

其高科技产品加铝合金电缆在北美已经成功运营了三十多年历史，在北美的市场份额约占50%。

Effect of Supersonic Gas-centrifugal Atomization Technology on the Properties of AgRE Alloy Powders

超音速气体离心雾化工艺参数对银稀土合金粉末性能的影响

The supersonic gas-centrifugal atomization Technology was used to study the influence of distinctive factors on the properties of AgRE alloy powders.

采用超音速气体离心雾化技术，研究了不同工艺条件对银稀土合金粉末性能的影响。

Study of the Superficial Pottery and Porcelain Technology in Aluminum and Aluminum Alloy Board Material

铝及铝合金板材表面陶瓷化工艺的研究

Technology of Liquid Die Forging for Adjustable Spanner Bodies

铝合金活扳手扳体液态模锻工艺

Study on surface pretreatment of titanium alloy adherend

钛合金粘接件表面技术研究

The running tests of the alloy coatings on the blade of hydraulic turbine produced using oxy-acetylene spray welding procedure manifested that the average service life of many different hydraulic turbine obtained a lot improvement after spray welding.

应用氧乙炔喷焊工艺在水轮机叶片上制备合金涂层，经过数台机组多年的实际运行，表明该材料抗磨蚀性能优异，喷焊后的水轮机叶片的平均使用寿命得到大幅度提高。

Irradiation Absorption Test of Hydrogen for Zr-2 Alloy in Chemical Decontamination Solution

Zr－2合金在化学去污液中的辐照吸氢试验

Tenacity and abrasively of high-intensity alloy steel body strengthened by balanced hardening treatment and stress removal.

高强度合金钢本体，经均衡之硬化处理及应力消除，强化本体韧性及耐磨性。

The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

采用TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。

Research of dynamics of surface oxidization of 4004 alloy at a constant temperature

4004铝合金表面恒温氧化动力学研究

The influence of inclusion on crack Stress Intensity Factor ( SIF) of Powder Metallurgy ( PM) FGH 95 was investigated using singular element method with fine mesh at crack front.

采用有限元方法中的奇异单元，研究了当粉末高温合金FGH95中存在由夹杂引起的裂纹时，夹杂对裂纹应力强度因子的影响；

The mechanical properties of fine grain cast and conventional cast integral turbine wheel were evaluated.

对比研究了高温合金铸型搅动细晶铸造和普通铸造叶轮的力学性能.

Design of Temperature Control System for Liquid Lithium Lead Bubbler

液态锂铅合金鼓泡器温度控制系统的设计