合金的例句大全

By using this process, the wettability is obviously improved between the hard metal and the liquid state silver brazing flux and copper brazing flux.

采用这种方法可以明显改善硬质合金与液态银钎料和铜钎料的润湿性；

Technology of Ultrasonic Brazing of Aluminum by Sn-Zn Solders and Strengthening Mechanism of Joint

Sn-Zn钎料超声钎焊铝合金工艺及接头强化机制研究

Effect of alloy powder on Microstructure of brazing seam

钎缝中合金粉对组织的影响

The cupping value of lubricated aluminum alloy sheet is studied by BCS-30D general sheet metal test machine.

在BCS-30D通用板材成形性试验机上，对铝合金薄板的杯突值进行了不同润滑条件的试验研究。

Development of Isothermal Holding Furnace for High Quality Aluminum Alloy Melt

高品质铝合金液保温炉的研制

Application of PLC in Control System for Melting and Holding Furnace for Magnesium

PLC在镁合金熔化保温炉控制系统中的应用

New Type Melting and Holding Furnace of Aluminum-alloys

新型铝合金熔化保温炉

However, when the content of Si is about 10%, its plasticity is poor, particularly in cold-rolling process. The poor plasticity led to the strip breakage in rolling process and it reduced the rate of finished products.

然而，4004Al-Si合金，由于含Si量在10%左右，塑性差，特别是冷轧性能差，进而导致轧制过程中易产生断带，成品率低。

Twin piston alloy callipers at the front and single piston callipers at the rear bring the large-diameter wheels to rest.

前轮是双活塞合金制动钳，而后轮是单活塞制动钳，可对大尺寸车轮进行制动。

Effect of Lanthanum on Hot Brittleness of the Al& 4% Cu Alloy

稀土La对Al-4%Cu合金热脆性的影响

Surface Oxidation and Hot Brittleness of Cu-Containing Low-alloy Steels

含Cu低合金钢表面氧化及热脆

The hot brittleness mechanism and structure of surface oxide coating of low-alloy steels containing 0. 3%-0. 7% of copper have been investigated by means of hot/ cold bending tests, optical microscopy, SEM and EPMA.

用冷、热弯试验及光学显微镜、扫描电子显微镜和X射线微区分析仪分析研究了含0.3%～0.7%Cu的低合金钢表面氧化层结构及热脆机理。

Solid Cemented High-Accuracy Surface Broaching Tool

整体硬质合金高精度平面拉刀的研究和开发

Prospect of application of the high earthquake resistant steel containing micro vanadium-titanium in-seismic design is discussed.

讨论了用钒钛微合金化研制成的高抗震性能结构钢在抗震设计中的应用前景.

Blast your way through the all-new action packed Metal Slug Mobile 3.

用火力打通这全新包装的动作游戏-合金弹头3.

High-strength zinc alloy die casting material for beautiful and elegant lock and high security performance.

材质使用高强度锌合金压铸而成,结构美观大方,防盗性强.

We now offer single-mode and multimode mode fibers with high temperature aluminum or copper alloy coatings.

我们现在提供单模和多模光纤高温铝或铜合金涂层.

This paper studies mechanical stirring of ADC 12 Semi-solid structure blank.

研究对ADC12铝合金用机械搅拌方法以获得半固态组织坯料.

The forming mechanism of semi-solid material of AZ 91 D magnesium alloy was analyzed.

分析讨论了AZ91D镁合金半固态组织的形成机理.

Experiments on semi solid slurry forming were carried out by practical electromagnetic stirring continuous casting method.

采用电磁搅拌连续铸造装置,制备具有触变性非枝晶组织的半固态铝合金圆棒.