合金的例句大全

The influence of Wall Thickness on the Mechanical Properties of Aluminium Castings

铝合金铸件壁厚对机械性能的影响

High Strength Aluminium Castings for Military Usage

军用铝合金优质铸件整体铸造技术

Cavitation corrosion resistance of cast high strength titanium alloy

高强度铸造钛合金的耐空蚀性能

It was found that a cobalt-based solid solution with a face-centered cubic crystal structure is presented accompanied by the secondary phase M_7C_3 with a hexagonal crystal structure in the cobalt-based alloy coating.

结果表明，堆焊合金层主要是由面心立方的γ（Co）和六方结构的M7C3构成，并且在钴基固溶体中存在着许多堆垛层错。

High accuracy grinding alloy ball spool and valve seat, sealed well function.

高精度研磨的合金球型阀芯、阀座、密封性能好。

Preparation of Semi-solid Aluminum Alloy by Sine Function Method

Sin函数冷却法制备半固态铝合金

The determination of boron in BMg alloy powder with acid-base titration method was established.

报道了酸碱滴定法测定硼镁合金中的硼.

The Microstructure of Transformed β in Titanium Alloy TC 6

关于TC6钛合金β转变组织的研究

Aluminum instrument case, medical box, air props Aluminum, air box, aviation equipment, boxes, aviation equipment cabinet.

铝合金仪器箱, 医药箱, 航空道具铝箱 、 航空箱, 航空设备箱, 航空仪器箱.

Formation and Causes of Inactivation of the Engine's High Tin-aluminium Alloy Bearing Bush

发动机高锡铝合金轴瓦失效形式和原因

So as to breach the box form structure of tradition steeliness bogie frame, it uses the cast aluminum alloy and Aluminum profile to replace steels and adopt the method of bolt joint to assemble the whole structure.

突破传统钢制构架箱形结构形式，采用铸造铝合金和铝型材对构架各梁体分别成型，然后通过螺栓进行连接。

The thermodynamic database for Mg alloys has been expanded and developed in the present work.

这为热力学数据库的进一步拓展奠定了扎实的基础，丰富和发展了镁合金相图热力学数据库。

Abt has also added new 22-inch BR alloys, and carbon fiber pattern leather to the interior.

阿布特也增加了新的22英寸巴合金和碳纤维型皮革的内饰.

Thus the AHS alloys with proper addition of Sb have the best microstructure and properties.

且在相同条件下,用Sb变质的AHS合金具有最佳的力学性能.

Quenching and aging have an important effect on the mechanical properties of AHS alloys.

淬火时效对合金最终性能有着重要的影响.

Laser rapid forming ( LRF), a new solidification processing technology, has many advantages which would make it competitive for the processing of TC21 alloy.

激光快速成形作为一种材料凝固成形新技术，诸多优点使其成为一种具有竞争力的TC21钛合金成形方法。

SEM photo reveals that the electroless Ni-P alloy deposit presents cystiform structure.

扫描电镜照片显示Ni-P合金镀层呈胞状结构。

Because of complex structure, traditional designing methods can not be used to do intensity analysis, stiffness analysis and stress analysis precisely for solid carbide end mill.

由于整体硬质合金立铣刀形状结构复杂，传统的设计方法无法对刀具进行精确的强度、刚度及应力分析。

AEM Study on Gamma-2 Precipitate in Cu-Al alloy

铜铝合金中γ2相沉淀的分析电镜研究

HAYNES HR 120 alloy cutting performance is bad and isvery sensitive to the work hardening.

HAYNESHR120合金切削性能差,对加工硬化很敏感.