合金的例句大全

Therefore, it is interest to investigate residual stresses in aircraft aluminum parts.

因此, 研究航空铝合金构件中的淬火残余应力就显得非常重要.

A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

综述了在室温强塑性变形过程中发现的新现象：第二相颗粒的回溶，合金基体重新形成过饱和固溶体。

The results indicate that on the condition of peak aging, the materials show higher resistant to creep than those overaged materials do.

结果发现：峰时效下，合金的蠕变抗力强于过时效状态下材料的蠕变抗力。

Shear band in overaged al-2. 45wt% cu alloy polycrystal

铝铜合金过时效多晶体中的剪切带

The cutting technology of alloy is interesting for technicians, who engage in machine manufacture.

钛合金材料的切削加工, 历年是从事机械制造的技术人员感兴趣的问题.

Atmospheric corrosion behavior of two high strength aluminum alloys with aluminum overlayer under strain

两种包铝的高强铝合金受力状态下的大气腐蚀行为

The trace element Rh exists mainly in native platinum, platinum-iron alloy and Pt-containing osmiridium.

主要矿物是自然铂矿、铁铂合金、钌铱锇矿、等轴锇铱矿和铱锇矿。

Finally, the successful superplastic gas pressure bulging forming experiment superplastic forming capability of the alloy.

通过胀形实验可以看出,该镁合金板材的超塑成形性能好,具有良好的超塑性成形应用潜力.

The effects of hydrogen on the activation energy and the kinetics of glass transition and crystallization of Zr-Ti-Cu-Ni-Be bulk amorphous alloy were studied by differential scanning calorimetry ( DSC) and the Kissinger equation.

利用非等温差热扫描量热分析方法及Kissinger方程，研究了H原子对Zr-Ti-Cu-Ni-Be块状非晶合金玻璃转变和晶化的激活能影响。

The Extrusion Dies CAD System Development of Light Alloy Wainscot with Flange based on VB 6.0

基于VB6.0的轻合金带筋壁板挤压模具CAD系统开发

With signal processed by computer, the glueyness of an aluminium alloy bicycle frame is investigaed experimentally and theoretically about whether the vibration monitoring technique is feasible.

本文应用电子计算机和振动信号分析处理技术，从理论和试验两方面研究了铝合金自行车车架胶接质量振动检测的可能性。

Fracture of needle-shaped eutectic silicon in Si-Al alloy processed by equal channel angular extrusion

等通道转角挤压硅铝合金针状共晶硅损伤断裂实验

According to the characteristics of fluid flow and solidification of different nonferrous alloys, an integrated commercial computer aided engineering ( CAE) system has been developed, which can be suited for different foundry methods.

根据不同有色合金充型流动及结晶凝固的特点，研制开发了适应于不同特种铸造方式的计算机辅助工程（CAE）系统，并进行了集成和商品化。

Structure, morphology, and distribution of silicides in IMI 679 alloy

IMI679合金中硅化物的结构形态与分布

On the basis of IIW standard and Palmgren-Miner theory, the fatigue life of some key positions on the type B120 car body are calculated.

基于IIW标准，运用麦因纳疲劳累积损伤理论，对B120型地铁铝合金车体的关键点进行了疲劳寿命预测。

The applications of mold flow of computer simulation in MIM of cemented carbide

充模流动计算机模拟在硬质合金MIM中的应用

The development and application and dissemination of vanadium micro-alloying HRB 400 ⅲ grade concrete iron

钒微合金化HRB400Ⅲ级钢筋的开发及推广应用

NEW CATALYTIC MATERIALS AND CHEMICAL PROCESS INTENSIFICATION& Amorphous Alloy/ MSB Reactor and HPW ( s) Particulate/ SCD Process

新催化材料和化工过程强化&非晶态合金/磁稳定床反应器和负载型杂多酸/悬浮床催化蒸馏

Glass products, jade, alloy resin for the mainstream.

产品以琉璃 、 玉石 、 树脂合金为主流.

Based on a new-abrasion theory, a high chromium alloy is designed.

根据新的磨蚀理论, 设计了一种高铬耐磨蚀合金.