合金的例句大全

Such as: lighting, door locks, sanitary ware, and so we constantly improve copper alloy-casting technology.

如: 灯饰 、 门锁 、 洁具等; 所以我们不断提高铜合金压铸技术.

It is made of high quality-carbon steel, and rolled copper alloy as its surface.

以优质的低碳钢为基体,表面烧结锡青铜合金, 经过多次烧结轧制而成.

Thereby, Cu-Ag alloy prpeared by Ohno continuous casting is a new material with better wear resistance.

因此, 通过热型连续定向凝固技术生产的铜银合金是一种耐磨性较好的新材料.

FCG behavior of alloys under ultrasonic fatigue loading

超声振动载荷下合金的疲劳裂纹扩展性能研究

Previous work in our laboratory has demonstrated that ultrafine amorphous alloys exhibited good catalytic behaviors in eAQ hydrogenation. However, their low surface area and poor thermal stability limit their industrial application.

已有实验室工作表明，超细非晶态合金在蒽醌选择加氢反应中有较好的催化性能，但是其比表面低、热稳定性差，大大限制了它的工业应用。

A high performance and decorative coatings for aluminum alloy railway carriage was developed.

研制了铝合金列车车厢用的高性能、高装饰性涂料.

Originally Edison used platinum alloys for the filament, in the belief that carbon was impracticable.

爱迪生不相信碳可作灯丝用, 所以一开始就用铂合金作灯丝.

The heat stamping experiment proves the deep drawing property of AZ 31 magnesium alloy sheet.

交叉轧制的AZ31镁合金薄板具有良好的深冲性能.

The friction property of high, middle and low P alloying cast iron was compared with that of ordinary cast iron.

比较研究了高、中磷合金铸铁与普通灰铸铁的摩擦性能。

The erosive-corrosive wear ( ECW) test of a slurry-pot type is a test method often used for investigating and evaluating the ECW resistance of an alloy or surface modified layer.

应用浆罐式冲刷腐蚀磨损试验考察和评价了合金或其表面改性涂层的抗冲蚀性能。

It has broad application prospects to plate Zn, Al and alloy steel wire that it is hot.

热镀Zn、Al及其合金钢丝有着广阔的应用前景。

The results show that the low cycle fatigue properties of the wire is higher than that of high carbon Patenting steel wire.

结果得出，低碳低合金钢丝比高碳Patenting钢丝具有高的低周疲劳抗力，温形变处理又可提高低周疲劳寿命30%～35%。并对这种钢丝的低周疲劳损伤进行了评价。

These evidences prove that the DQC in these alloys is a stable phase above 800 ℃.

所有这些实验结果都证实这些合金中的十重准晶在800℃以上是稳定的。

For surfacing welding the axle, steam valve blade of mixer and spiral carrying.

用于堆焊碳钢或合金钢的轴 、 过热蒸气阀们、搅拌机桨、螺旋输送机叶片的堆焊.

The hydrogen diffusion coefficient had the different performance in different stages of cycling test.

研究发现,合金在循环曲线各个阶段的氢扩散系数均不相同.

A simple chemical etching method was developed for fabricating the super-hydrophobic surface on polycrystalline aluminum alloy.

采用简单化学刻蚀的方法制备出多晶铝合金基体上的超疏水表面.

The effects of surface modification on improving wear resistance, erosion resistance and biological properties were illuminated.

阐述了表面改性对提高钛合金的耐磨性能 、 耐腐蚀性能和生物活性的作用.

We made out three different forms complex metal oxide of zinc titanate by changing experiment parameters.

同时,改变实验条件又制备出了不同形态的钛酸锌复合金属氧化物.

Zinc alloy handle with PVC head, Logo printing and engraving is available.

锌合金电镀手柄,橡塑叩诊头, 可以按照客人的要求丝印图案.

At cervical disc herniation patient group, titanium Cage was used in 2 cases, CBK in 12 cases, plate in 2 cases.

颈椎间盘突出症者采用前路钢板固定2例，CBK颈椎Cage固定12例，螺纹状钛合金Cage固定2例。