固体的例句大全

Numerical simulation for the axial deformation of solid propellant grains under the high acceleration shock

高加速度冲击下固体推进剂药柱轴向形变的数值模拟

The storm fused the electric mains.

固体开始慢慢地熔合.

The application of life cycle assessment in solid waste management

产品生命周期评价在固体废弃物管理中的应用

In fact, most glass components in practice work in biaxial or multiaxial stress states, whether biaxial stresses have any influence on fracture behavior of solid is an argumental question, and this question has not been satisfactorily answered so far.

由于实际玻璃构件大多是在双向或多向应力状态下工作的，而双向应力是否影响固体的断裂行为一直是一个有争议的问题，且至今尚未有统一的结论。

By adhesive bonding strength, combines two solid materials on the surface of the method call.

通过胶粘剂的粘结力, 将两种固体材料的表面连接起来的方法叫粘结.

Closed burner method is used for determining burning rate of the solid propellants.

密闭燃烧器法是一种间接测定固体推进剂燃速的方法.

The basic principle and application level of adaptive optics in solid-state tactical laser weapons are introduced.

评述了目前固体战术激光武器中自适应光学系统存在的问题和发展方向.

Physical adsorption depends on van der Waals forces of attraction between molecules and condensation of liquids.

物理吸附取决于固体吸附剂和被吸附物的分子间的范德瓦耳斯力.

Method of amorce mass estimation for solid rocket motor

固体火箭发动机的一种点火药量估算方法

The stability of a space centered interior difference scheme and that of a finite difference solid wall condition are studied for the Cartesian grid.

另外还研究了分级笛卡尔网格对内点格式稳定性的影响和插值固体边界条件的稳定性。

To drain or seep through a porous material or filter.

X射线能够透过某些固体物质.

She states that After three months of cefuroxime nebulizing treatment my symptoms were gone for four solid months.

她指出，经过三个月的头孢呋辛雾化治疗了我的症状4固体个月。

Glue immersion is an important process that influences the properties of reconstituted bamboo lumbers.

讨论胶黏剂固体含量、浸胶方式、浸胶时间等因素，对重组竹材物理力学性能的影响。

The large intestine absorbs water from the material that cannot be absorbed. This material more solid.

物质中吸收水份,把这些物质变得更像固体.

EPDM ( Ethylene Propylene Diene Monomer) is used as the insulation on chamber wall of SPRM. It is a good protective material of charring type. During being heated it formed the charring and pyrolytic layers.

作为固体火箭发动机燃烧室壁面绝热层的EPDM是一种炭化型热防护材料，受热时形成炭化层和热解层，在燃气和粒子冲蚀下不断减薄并带走热量，有效地保护燃烧室壁。

Recommended for dry-blending operations with cold or hot ( post-dryer ) solid plastic. Requires proper dust handling equipment.

建议与固体塑料在冷态或热态 ( 干燥后 ),干燥状态下混合. 需要添加防尘设备.

In this way, sinters output increased, solid fuel consumption is reduced and sinters quality is improved.

该工艺可提高烧结机利用系数，减少固体燃耗，改善烧结矿质量。

Based on the experimental formula of fore-ignition design, the initial amorce mass of a small solid rocket motor with end-and-lateral burning grain and aft-ignition manner was estimated firstly.

采用头部点火设计经验公式对端面-侧面燃烧、尾部点火的小型固体火箭发动机点火药量进行了初步估算。

Without scientific and effective management, the solid waste will do damage to ecological environment and great land resource will be seriously wasted while disposing the solid waste.

有色固体废弃物如没有科学有效的管理，就会破坏生态环境，其处置会占用大量的土地，造成土地资源的严重浪费。

Solid's flow can be measured by weigh dump.

固体的流量可以由翻斗秤测量.