实例的例句大全

This paper analyses the production technology of breast-wear, introduced the method to design a balanced product line of breast-wear.

通过分析文胸的生产工艺，从工序分析着手，通过实例说明了制定均衡生产线的过程与方法。

Several methods of developing electronic jacquard tie silk are introduced with some examples in this paper.

文章以实例介绍了电子提花真丝领带绸的产品开发方法。

It is an ideal production modular to weave tie silk with electronic jacquard device, which is highly technical Several methods of developing electronic jacquard tie silk are introduced with some examples in this paper

利用电子提花机制织真丝领带绸，技术含量高，是理想的领带绸生产模式。文章以实例介绍了电子提花真丝领带绸的产品开发方法

The configuration of supply and return water main and riser in the pipe well of the system is analyzed.

结合实例，分析了系统中管井内供回水干管、管的布置。

The design of the reinforcing ring and the calculation of external pressure seal were summarized, which had been used as the design basis of the FRP vacuum equipments with the practical example of barometric condenser.

通过气压冷凝器设计的实例，表明这一方法己成功地用作玻璃钢真空设备的设计依据。

The analysis and treatment of trouble of high-voltage circuit system are carried out through instance, and the effect of mains voltage fluctuation on equipment is also inquired initially.

对高压电路系统故障的实例进行了故障原因分析和处理，并对电源电压波动对仪器的影响进行了初步的探讨。

The purpose of tension control and main factors influence tension were explained according to the characteristic of web press.

通过对罗兰卷筒纸印刷机纸带张力控制系统实例，详细剖析了张力控制系统的控制规律和控制回路。

An error mathematic model of minimum deviation ellipse interpolation method was established, complete induction was adopted to prove that the error of minimum deviation ellipse interpolation method is not more than half pulse equivalence.

从建立最小偏差椭圆插补算法的偏差公式的数学模型入手，利用数学归纳法证明了采用该方法得到的偏差不大于1/2个脉冲当量，并用实例加以验证。

According to the frame mentioned above, this thesis describes the primary class design during a migration process.

最后，依照上述框架的描述，给出了迁移实例的迁移过程的主要类设计。

Finally, based on the structure of the south cable bent tower and the construction technology of the JiangYin Bridge, the computation of the bridge's crossbeam bracing structure is carried out and an analysis of the computation's results is also made.

最后，根据江阴大桥南索塔结构和施工工艺，进行了横梁支撑体系实例计算，并对结果进行了分析。

According to the example, the bidding decision making procedure was explained and the results were analyzed.

结合工程实例，具体阐述了投标决策过程，并对决策结果给予了细致分析。

The CAD system for the drawing of the bimetal sheet was introduced and an example was also given.

本文介绍了自行研制的双金属板材拉延成形的CAD系统，并给出了设计实例。

Through analyzing and computing satisfy environmental noise criteria, a sort of noise absorption wall and sound insulation wall are introduced, which obtained good effect. It has reference value for outdoor machine design in air conditioning system.

在分析和计算了要满足环境允许噪声标准后，给出了一种吸音墙体和隔声挡墙的设计实例，达到了良好的治理效果，对空调系统室外机设计有参考价值。

For data in Digital Seabed System vary in origin, data-structure, criterion, this paper cites Digital Seabed System as an example, utilizes current techniques and methods to discuss data fusion and issuing through Web.

本文以数字海底系统为实例，针对系统所涉及的数据具有多来源、多数据格式、标准不统一的现状，利用当前流行的技术和方法进行数据融合和网络发布技术的研究。

Combined with practical works problems of blind ditch and underground river frequently encountered in soft soil foundation works in Wenzhou region are briefly introduced as well as related treatment methods in order to correctly treat soft soil foundation to ensure security of structure.

通过几个工程实例，简单介绍了在温州地区软弱地基中遇到的一些暗沟、暗河问题及处理方法，以正确处理软弱地基基础，保证结构安全。

Real computing case using blocky structure for model-building in rather complicated geologic structure and conducting ray-tracing by iteration is given in the paper.

文中给出了在十分复杂的地质结构中应用块状结构方法建模并用迭代追踪法进行射线追踪的计算实例。

An Example of Research on Dynamic Balance of Pit Fan Blower on the Spot

矿井扇风机现场动平衡研究实例

A troubleshooting instance is given for MAZDA 6 that hot air blown out from out port of air conditioner in summer season, by checking cooling tube of air conditioner and actuator of mixing valve in A/ C box.

列举了通过检查空调制冷管路、A/C箱内混合气门执行器并采取相应措施，排除了一辆马自达6车在夏天开空调时出风口出热风的故障实例。

The analysis taking booster charge design of columnar explosive device as the example shows that parameter selection method of booster charge is feasible.

以柱形爆炸器传爆药柱设计为实例，说明此套传爆药柱参数选择方法是可行的。

For each case, we took different protection scheme. The strength of these schemes is enhancing step by step, so the boosting pressure of water hammer is different.

每个工程实例，本论文采取了不同的防护方案，防护力度逐步加大，水锤波速对于水锤升压的影响也是不尽相同。