屈服的例句大全

Fitting coefficients K were calculated by strength fitting calculation in Ashby formula, and the results are K0.75. ( 3) The energy-absorption characteristic of Al2O3k/ Al porous composites was studied.

计算了关于Ashby屈服强度公式中的拟合系数K，发现K0.75。（3）研究了Al2O3k/Al多孔复合材料能量吸收特性。

The yield strength is reduced by 10~ 20 MPa after natural ageing and it can be simulated by artificial ageing ( 100 ℃× 2h or 200 ℃× 1h).

自然时效后屈服强度下降10～20MPa，用人工时效可以模拟自然时效，工艺是100℃×2h或200℃×1h。

Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding.

塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。

A multi-variable analytical model has been built to study the effect of key input variables ( KIV) on YS ( KOV) through analysis of a great number of historical data on production with three different methods including regression analysis, neural network and decision tree.

基于大量的生产过程历史数据，分别用回归分析、神经元网络、决策树三种不同方法进行分析，建立各关键输入变量（KIV）对屈服强度（KOV）影响的多变量模型。

We never yield to dictatorship.

我们不能屈服于独裁政治.

They thought they could starve the garrison into surrender.

他们认为他们可以用饥饿的办法使卫戍部队屈服.

To strive, to seek to find and not to yield. -- Alfred Tennyson , British poet.

要奋斗, 要探索,要有所发现,而不要屈服. 英国诗 人丁 尼生.

To strive, to seek, to find and not to yield. ( Alfred Tennyson, British poet )

要奋斗, 要探索, 要有所发现,而不要屈服. ( 英国诗人丁尼生 )

That made him protest still further, but in the end he gave in.

这使得他更加抗议起来, 但是最后还是屈服了.

He surrendered but asked for quarter.

他屈服了,但是要求手下留情.

He's not the sort of person to buckle under to rumours.

他不是那种屈服于流言蜚语的人.

She's a gutsy player, she never gives in.

她是个勇敢的选手, 从不屈服.

Though all the might of papistry were gathered against us.

尽管天主教施加了各种压力，但我们绝不屈服。

Whn a capillary viscometer is used to measure the two constants of a Bingham body, the coefficient of viscosity K and the yield stress f, a quartic equation, is obtained and there are four solutions.

用毛细管测定宾汉体的两个常数，即粘度系数K和屈服应力f时，方程是四次的，会有四组解答。

This poor son of a gun would not yield.

不过这个可怜的倒霉鬼没有屈服。

TEM and SEM analysis showed that the phase structure of AEMS and AOMS were co-continue structure and the toughening machenism was severe shear yielding when the blends reached their highest notched Izod impact strength.

TEM和SEM分析表明，缺口冲击强度达到最高值的AEMS和AOMS，其相结构为近连续相结构，增韧机理为剪切屈服机理。

After heat treatment, UTS and YTS of RS bars did not change obviously, the E% improved 5.6 times.

热处理后，快速凝固挤压棒材的抗拉强度和屈服强度均没有明显变化，伸长率却提高了5.6倍。

The results show that the addition of Y and Zn improves YTS values but decreases the UTS and elongation values of as-cast alloys.

结果表明：Y、Zn元素提高了合金的屈服强度但降低了抗拉强度和延伸率。

The FEM calculation shows that with increasing loading rate, general yield load Pgy, stress and strain rate ahead of notches for the notched specimens increase.

有限元计算表明：缺口试样的整体屈服载荷Pgy，缺口前的应力，应变率均随加载速率的增加而增加。

Based on this model, it is possible to predict finished BH steel product's YS if certain KIV values are available. As a result, qualification rate has climbed by 7% and better economic benefits have been reaped.

以该模型为基础，在已知某些KIV取值的情况下，能够较为准确地预测BH钢成品的屈服强度，合格率提高7个百分点，取得了较好的经济效益。