工艺的例句大全

Main technology parameters between round and S ( Z) type winding package steel wire are compared, production process and technology requirement are given.

对圆型和S（Z）型绕包镀锌钢丝主要技术参数进行对比，并给出生产工艺和技术要求。

Discussion about Optimum Conditions for Vacuum Osmotic Cocoon Cooking Process

制丝真空渗透煮茧适煮工艺条件的探讨

Application of SAS Multi-Regress Statistical Analysis to Design of Cocoon Cooking Process

SAS多元回归统计分析在煮茧工艺设计中的应用

Research into the Optimized Cooking Process of Mashed Fish Gelatin

烹饪中鱼肉茸胶制品的优化调配工艺研究

Experiments on Cocoon Cooking Process for Reducing Inner Dropping End Rate

减少内层落绪率的煮茧工艺试验

The Application of Fuzzy Control Technology in Pulp Cooking Process

模糊控制技术在煮浆工艺上的应用

High-Concentration Ethanol Production from the Corn Starch by Using Low-Temperature Cooking Process

利用低温蒸煮工艺进行高浓度酒精发酵

Selection of optimum parameters for cocoon cooking process

煮茧工艺参数的优选

Study of the knitting technology of DKP Type cut loop knitting machine

DKP型割圈绒编织机工艺技术的研究

Research on welding technique of DHH high-carbon railway track

DHH高碳钢道轨焊接工艺研究

After analysed study on charcoal kiln, material, fuel, collection technology, storage condition and making method.

通过对炭窑 、 炭材 、 燃料 、 收集工艺 、 储存条件和精制方法等的分析研究.

The key points of fillet welding and NDT arc introduced form practical experience steam drum.

从实际焊接工艺入手,重点介绍了管座角焊缝的焊接与探伤的要点.

Optium fermentation medium and culture conditions were determined through Erlenmeyer flask liquid fermentation, ampliate liquid fermentation technique was also determined later.

通过茯苓的摇瓶液体发酵培养，确定了茯苓液体发酵的最适发酵培养基和最适培养条件，并进一步确定了最佳的放大培养工艺。

For example , vacuum distillation, vacuum evaporation, crystal, drying etc.

真空蒸馏、蒸发 、 脱水 、 结晶 、 干燥等工艺过程中.

The quality of the regeneration oil is superior to that obtained by vacuum distillation.

再生工艺可以按粘度为序将润滑油分离为不同的馏分.

This paper analyzes the problems existing hardening and tempering process of the large draw bar.

该文分析了大型拉杆调质工艺存在的问题.

On the basis of the hardware and software system above mentioned, the DLF process of 3D metal parts was studied systematically.

在上述软硬件系统基础上，本文进行了大量的DLF工艺试验。

In the investigation, the conception of critical initial current density ( DKC) was put forward, and the law of effect of component and technology conditions on bond intensity of plating layer was discussed.

提出了临界起始电流密度的概念，讨论了电解液成分和工艺规范对镀层结合强度的影响规律。

The secondary effluent from Gaobeidian Sewage Treatment Plant was treated with the DGB tertiary process for groundwater recharge.

以北京高碑店二级出水为对象，进行了二级出水地下回灌的DGB深度处理工艺的风险评价。

Effect of Annealing Technology on Deep-drawing Property of DDQ Cold Sheets Rolled with CSP Hot Strips

退火工艺对CSP基板DDQ冷轧板深冲性能的影响