工艺的例句大全

Conclusion: Suanzaoren aqueous decoction was selected as the optimal technological process.

结论: 选取酸枣仁汤水煎液为较优提取工艺.

The drawing of single crystal silicon in a closed thermal system is described.

本文介绍采用密闭热系统拉晶工艺拉制硅单晶的情况.

Studies on Dyeing of Stretch Corduroy Using Reactive Dyes with Bifunctional Group

双官能团活性染料染弹力灯芯绒工艺研究

A Study on the Dyeing of Silk with Bifunctional Reactive Dyes

双活性基活性染料真丝绸染色工艺研究

Generally, molecular sieve dehydration process includes 2-tower flow, 3-tower flow or multiple-tower flow.

天然气分子筛工艺一般分为两塔流程 、 三塔 或多塔流程.

Design of mold and research of process for polyurethane elastomer oil seal are introduced.

介绍聚氨酯弹性体油封的注射模具的设计及工艺研究.

Electric heat tracing technology has been widely used in the recovery and transportation of viscous oil.

在稠油和高凝油开采与输送过程中,电伴热工艺已得到广泛应用.

A spraying polish wax emulsion can be used on cars, electrical appliances and furniture.

本文研究了用于汽车 、 家用电器和家具的乳状液喷雾上光蜡的配方和工艺过程.

The appropriate fermentation parameters were determined and the fermented beef sausage processing was also researched.

通过试验,确定合适的发酵参数,探索了牛肉发酵肠的生产工艺.

Know basic automatic process control theory.

了解基本的工艺自动控制原理.

Advanced production equipment, mature production technology and perfect quality assurance system.

先进的生产设备，成熟的生产工艺及完善的质量保证体系。

Educational Anthropology Interpretation on the Inheritance of the Traditional Buyi Wax Printing Craft

布依族蜡染工艺传承的教育人类学阐释

Buyi wax printing craft experienced by Jane to numerous, from coarse to fine, from low level to high level of development.

布依族蜡染工艺经历了由简到繁、由粗到细、由低水平到高水平的发展过程。

The treatment of wastewater from wax printing process was studied.

对蜡防印花生产废水清污分流处理工艺进行了研究。

Discuss on pattern design and production technology of wax printing in Africa

非洲蜡防印花布图案设计及其生产工艺探讨

Wax printing has long been a widespread technique used in the history of Chinese fashion.

在中国服饰中，蜡染是一种流传时间长、流行范围大、使用领域广的服装工艺。

Study on Technology of Imitation Wax Printing on Cotton Fabric Using One-Bath Dyeing for Ground with Reactive Dye and Naphthols

纯棉仿蜡染印花采用活性、色酚一浴法染地工艺研究

Comparative analyses on the wax deposition are made for different types of crude oils by using two wax collectors under the same process conditions, one coated with SO4, the other with no coating.

在相同的工艺条件下，对几种原油在涂有SO4涂料覆盖层表面和裸露钢表面上的结蜡情况进行了对比分析。

Under this conditions, the effect of emulsifying time and the stirring speed on the wax emulsifying were studied, the optimum emulsifying conditions was obtained: emulsifying time> 15 min, stirring speed is between 1 500 r/ min~ 2 000 r/ min.

在此条件下，考察了乳化时间和搅拌速度对石蜡乳化效果的影响，最后确定最佳乳化工艺条件为：乳化时间>15min，搅拌速度1500r/min～2000r/min。

Discussion on the Technical Design of Rib Neckband in Woolen Sweater

羊毛衫罗纹领工艺设计探讨