弯曲的例句大全

The bad: The wire spring visor clip is easily bent if handled roughly.

坏: 钢丝弹簧遮阳板夹很容易弯曲,如果处理大约.

The complex modal analysis is developed to investigate bending vibration of a viscoelastic beam.

发展复模态分析研究黏弹性梁的弯曲振动.

The curvature vertebral column seen here is known as scoliosis.

图示脊柱弯曲为脊柱侧凸.

Workmate 2 : I don't know. Are we grading on a curve?

工友 2: 我不知道. 我们要不要以弯曲度来划分等级?

Shall weave Old England's winding Sheet.

将纺织古老英国弯曲的褥单.

The willful boy ran away wildly along the winding path.

那个任性的男孩沿着弯曲的小道疯狂地跑走了.

There is wearable blocks welded at chain running way at drive frame.

在机头架中板弯曲部位链子运行轨道处连接有耐磨块.

Next, at the water level the tank the amount of water the flush will be.

如果水箱没有充满正常水量(水箱内侧应该有一条水位线),慢慢地弯曲一下浮囊阀, 看水位会不会上升.

With a given bending and torsion deformation of wing tip , the whole geometry can be estimated.

机翼的平面形状可看作由多个梯形组成,机翼弯曲变形为三次函数,扭转变形为一次函数.

The first two natural frequencies and modes of the torsion and bend are then obtained.

计算得到一阶、二阶整体纵向扭转和弯曲固有频率和相对应的振型.

Inspect for scuffed or bent valve stems.

检视气门杆是否擦伤或弯曲.

As I walked in, it felt like I was in a time warp.

当我走进房间, 它给我的感觉像是时间的弯曲.

A flat , curved, usually wooden missile configured so that when hurled it returns to the thrower.

(澳大利亚)一种弯曲的木条;用适当的方法投掷时将回到投掷者的手中.

This feature allows both for taper bending and easy adjustment of angle differences.

这一特征允许锥度弯曲和轻松调整角差.

The spine curves slightly posteriorly atL 5.

脊柱在L5处轻微向后弯曲.

Look at your image. Bend the metal sheet forward and then backward.

观察你所成的像. 先向前再向后弯曲金属薄片.

Clouds elegant mountain-bending nature of the crane sculpture is realistic and lifelike!

行云飘逸,山子弯曲自然,鹤的雕刻更是惟妙惟肖,栩栩如生!

Mr Johnson has banished the dreadful single-decker "bendy buses" from London's streets.

约翰逊已将奇丑的单层“弯曲大巴”（bendy bus）赶出了伦敦街头。

Their coiled image is even becoming some kind of a symbol of responsible energy use.

它们弯曲盘绕的形象甚至成为了合理利用能源的一种标志.

With increasing GSP contents, the tensile strengths of PP/ GS-PP/ talc composites increase obviously, while the flexural modula of composites change little.

随着GSP含量增加，PP/GSP/talc复合材料的拉伸强度明显提高，而弯曲模量影响较小。