形貌的例句大全

Sintering temperature has also great influences on fracture characteristic and properties.

烧结温度对断口形貌和力学性能也有较大影响.

SEM corrosion structure and SEM appearance of fracture were observed.

观察了热压烧结SEM腐蚀组织和SEM断口形貌.

This paper introduced the preparation of zinc oxide whiskers with different morphology.

摘要以微米氧化锌为原料,采用微波加热法直接加热,制备出2种不同形貌的氧化锌晶须.

The morphology of the diamond nanoplatelets varies with growth conditions.

奈米平板钻石会因为制程条件的改变,而呈现不同的形貌.

The morphology of glass surface is observed by polarizing microscope.

利用偏光显微镜,拍摄显微照片,观察表面形貌.

The preparations of ultrafine strontium carbonate particles with various shapes were reviewed.

摘要对目前国内外不同形貌超细碳酸锶粒子的制备情况做了简要的综述.

The composite displays the fracture features of the dimple and intergranular fracture.

复合材料的断裂形貌为韧窝加沿晶断裂.

Clear atomic images of graphite surface and the DNA structure were obtained.

得到了石墨表面清晰的原子分辩图象以及猪脾DNA分子 双螺旋结构的STM形貌图.

Pattern recognition of fractographs is very important for analysis of fracture surface.

断口形貌模式识别的工作对断口分析有着重要的意义.

In this paper pattern parameters of roughness profile were analyzed.

本文分析了机械加工表面的粗糙度曲线形貌参数的统计特征.

The impact property of four air cooled bainitic steels containing carbon 0.

的空冷贝氏体钢的冲击磨损性能,并用扫描电镜观察了磨损表面的形貌特征.

The technology of surface topography modeling and simulation for ultra-precision diamond turning .

超精密 车削工件表面形貌形成的仿真建模技术.

The morphology study showed that the rutile crystals prepared were simplex.

形貌分析表明,制备的金红石晶粒常见形态为单形.

He was a man of striking ugliness; fat with a bullet-head set on a short neck.

他是个形貌奇丑的人; 体形臃肿,圆头短颈.

With increasing hydrogen content , the fracture characteristics from dimple to quasi-cleavage.

随着原始氢浓度的提高,含氢裂纹体的断口形貌逐渐由韧窝向准解理过渡.当原始氢浓度为79.19ppm时, 断口形貌已全部为准解理.

Precipitation of oxygen and carbon in buk dislocation-free CZ Si annealed at450 ℃, 700 ℃ and 1050 ℃ has been studied using infrared absorption, X-ray topography, X-ray anomalous transmission, AES and HVTEM.

利用红外吸收、x射线形貌照相、x射线反常透射、俄歇电子能谱和高压透射电子显微镜研究了在450℃、700℃和1050℃热处理后无位错CZ-Si单晶中的氧、碳沉淀。

The wear resistance of D8 、 D9 were compared with 45 steel's. The wear mechanism was analyzed by observing the wear morphology with SEM.

分析比较了45钢与D8、D9两种耐磨堆焊材料的磨损性能，并利用SEM对这几种材料在混凝土工况条件下的磨损表面形貌进行了现察，分析了它们的磨损机理。

From the present point of view the ballas morphologies can be described by various microstructures.

按照目前的观点，半刚石的形貌可通过多种显微结构加以描述。

TEM morphology of the twin specimens at stress plateau stage and martensite section at hardening stage has been observed.

观察到高应变率时应力平台与硬化阶段的TEM组织形貌分别为孪晶与断续的马氏体。

The compose and microstructure of intermetallic compound after temperature cycling test are also observed by scanning electron microscope ( SEM).

通过扫描电镜（SEM）对温度循环试验后焊球金属间化合物（IMC）层和剪切强度试验后的断裂面进行了形貌、结构和组分的观察及分析。