形貌的例句大全

TEM morphology of the twin specimens at stress plateau stage and martensite section at hardening stage has been observed.

观察到高应变率时应力平台与硬化阶段的TEM组织形貌分别为孪晶与断续的马氏体。

From the present point of view the ballas morphologies can be described by various microstructures.

按照目前的观点，半刚石的形貌可通过多种显微结构加以描述。

Precipitation of oxygen and carbon in buk dislocation-free CZ Si annealed at450 ℃, 700 ℃ and 1050 ℃ has been studied using infrared absorption, X-ray topography, X-ray anomalous transmission, AES and HVTEM.

利用红外吸收、x射线形貌照相、x射线反常透射、俄歇电子能谱和高压透射电子显微镜研究了在450℃、700℃和1050℃热处理后无位错CZ-Si单晶中的氧、碳沉淀。

The wear resistance of D8 、 D9 were compared with 45 steel's. The wear mechanism was analyzed by observing the wear morphology with SEM.

分析比较了45钢与D8、D9两种耐磨堆焊材料的磨损性能，并利用SEM对这几种材料在混凝土工况条件下的磨损表面形貌进行了现察，分析了它们的磨损机理。

Surface characterization and microstructure studies are performed on chemical vapor deposited ( CVD ) tungsten coating.

研究CVD钨涂层的表面形貌和结构、断面性能、涂层的抗热震性能及高温扩散性能.

The TG-DTA , IR, XRD, TEM and BET Methods : Were used to characterize structure and morphology of nanocrystalline ZnO.

以TG -DTA 、 IR 、 XRD 、 TEM和BET等测试方法研究了纳米ZnO粉体的结构和形貌特性.

The TG-DTA , IR, XRD, TEM and BET Methods : Were used to characterize structure and morphology of nanocrystalline ZnO.

以TG -DTA 、 IR 、 XRD 、 TEM和BET等测试方法研究了纳米ZnO粉体的结构和形貌特性.

The phase structure and microstructure of MBO _ w was studied with SEM , TEM and X-ray diffraction ( XRD )

利用SEM、 X - 射线衍射 ( XRD ) 和透射电子显微镜(TEM)研究MBO_w的形貌与结构.

LME of impact fracture were measured. Fractography of instrumented impact were analyzed by SEM.

测量了冲击断口试样的横向扩张量,利用扫描电镜分析了示波冲击断口形貌.

The surface morphology, crystal structure and super _ normal transition temperature for sample A, B have been investigated.

采用相应的烧结工艺得到高温超导厚膜A和 B.研究高温超导厚膜A 、 B的 表面形貌 、 晶体结构、超导转变温度.

During the simulated experiment of gears running-in, the surface topography of samples are changed.

本文通过齿轮副跑合的模拟试验,得出了齿轮副在跑合过程中表面形貌的变化规律.

The deposition rate and morphology of Ag deposit are all different in each stage.

在不同的沉积阶段,银晶层的沉积速率和形貌也不同.

The experiment results show that with calcining temperature rise the color of ferric red gradually deepened from mauve to chrysoidine, morphology of ferric red also changed.

实验结果表明：随着煅烧温度的升高，铁红颜色逐步加深，由橘红变为紫红，铁红的形貌也发生了变化。

Under different conditions, CdS with different shape and optic nature was obtained.

在不同条件下得到的CdS具有不同的形貌和不同的光学特性。

The sintering calefactive system was made by the TG-DSC curve analysis. Surface morphology analysis was performed with scanning electron microscopy.

利用TG-DSC曲线分析制定烧结升温制度，采用扫描电镜观察多孔陶瓷表面形貌。

The changes of surface potential and topography of Fe-Mo amorphous alloy coatings deposited In original alkaline bath at room temperature were investigated.

研究了非晶态Fe-Mo合金镀层在室温下的原碱性镀液中或其他溶液介质中的表面电位、表面形貌的变化。

Computer Simulation of the Variation of Cylinder Bore Surface Profile during Running in

磨合过程中缸套表面形貌变化的计算机仿真

The composition, appearance and grain size of dysprosium fluoride product have been characterized by XRD, TG, DTA, TEM and X-ray fluorescence analysis. The results show that the DyF 3 product have satisfactory quality.

用X射线衍射、X射线荧光光谱分析、差热－热重及透射电镜等分析方法对产品进行了组成、形貌和粒径分析，获得了理想的结果。

The catalysis growth mechanism and morphologic structure of CNx nanotube are also discussed.

本论文还对CN x纳米管的催化生长机制，形貌结构特征进行了探讨。

In addition , white layers was also observed transmission electron microscope.

还利用透射电子显微镜观察了白层的形貌.