往复的例句大全

Fault diagnosis of reciprocating engine is a very difficult and popular problem.

往复发动机的故障诊断是较困难和热点的研究问题.

Obstruction or vibration in the movement of roving traverse.

粗纱导纱器的往复运动引起振动.

The bearing may make the straight reciprocating main motion on the axis.

轴承可在轴上做往复直线运动.

The piston is reciprocating inside cylinder.

活塞在汽缸内部往复运动.

The machine is used for cutting alu-door-window corner braces .

铝合金往复角码自动切割锯主要用于铝合金门窗 角码 的切断加工.

The ball is doing a reciprocating movement.

那个球在做往复移动.

Now to an example to illustrate the reciprocating piston pump works.

现以活塞式为例来说明往复泵工作原理.

Special sliding setting , stable running stroke , accurate stripping & cutting.

独特式 滑座, 往复行程平稳,切剥精准.

To and fro in his breast his thoughts were heaving and dashing.

胸中往复的是他的思绪起伏冲撞.

This paper introduces a vibration diagnostic system for reciprocating machine.

研究了一套振动诊断系统软件,可用于往复机械的故障诊断.

Reciprocating pump is a widely used machine equipment in engineering.

往复泵是工程中广泛应用的一种机械设备.

Hyundai Motor adopt the dyadic piston internal-combustion engine moving and forth broadly.

现代汽车广泛采用往复活塞式内燃发动机.

This prevents it from endlessly looping around in inter network.

这样可以防止数据包无休止地在网络之间往复循环.

However, as the SAF reciprocating motion, resulting in the hinge-slow, maintenance difficulties.

但由于折刀的往复运动, 造成折页速度较慢 、 维修困难.

In the circle, in a hoop that never ends.

造物的链条往复循环, 生生不息.

The direction of motor is CW or CCW, but don't run to and from or plug braking.

电机旋转方向可任意选定，但不可往复运转或反接制动。

On the foundation of study problem and weakness of the coulter, the paper designs a kind of new no-tillage Push-pull Punching planter, which sows with the hill-dropping that replaces to the trash destroyer and the disk coulter, avoiding the disk coulter stop.

本文在研究现有开沟器存在的问题和不足的基础上，设计了一种新型免耕覆盖往复冲孔式播种机，该机用穴播方式代替破茬分草和开沟，有效的避免了开沟器的堵塞。

The dental abrasive testing machine applies a V-like swing arm to driving the wearing part to move along the slope back and forth, which is connected with an eccentric wheel fixed on the crankshaft of the gear motor through a connecting rod.

该机采用V形摆动臂来驱动磨耗部分沿斜面作往复磨耗运动，V形摆动臂通过连接杆与减速电机轴上的偏心轮连接。

Simulation analysis of quasi-static cyclic test for energy dissipation braced frame structures

消能支撑框架结构的低周往复水平荷载试验仿真分析方法

Because the trough movement is a standard crank mechanism, the movement equation on the displacement ( s), speed ( v), acceleration ( a) and time ( t) was established.

往复槽锅为一典型的对心曲柄滑块机构，写出了位移S、速度V和加速度a与时间t的运动方程。