控制的例句大全

The communication between CNC system and machining center tool crib during automatic tool change is accomplished by assemble language.

采用汇编语言编程实现在自动换刀过程中加工中心CNC系统与刀库控制PLC间的通信。

This paper described the design mind and support technology and system principle of the control protection system of nuclear criticality safety experiment facility for nitride uranium solution.

主要阐述了铀溶液核临界安全实验装置控制保护系统的设计思想、保障技术和系统原理。

A Parameter Measurement and Control System of Cropping Shears and Post-Rolling Equipments by Microcomputer

飞剪及轧后设备的微机参数检测与控制系统

Application of the biodiversity strategies in the control of rice blast by mixed cropping

水稻生物多样性混栽控制稻瘟病技术的应用

In the design, four MCS-51 single-chip microcomputers are connected by crossbar network topology and a PC 386/ 486 is the host computer, forming a distributed multicomputer system.

它将四片MCS－51系列单片机通过全互连的拓扑结构连接起来，以PC386／486为主机，构成一个主从分布式控制的多机系统。

The Implementation and Control of CMOS/ SEED Optoelectronic Integrated Crossbar Interconnection Network

CMOS/SEED光电子集成Crossbar互连网络的实现及控制

An optical implementation and its control of optoelectronic integrated crossbar interconnection network is reported in this paper.

本文报道了光电子集成Crossbar互连网络的光学实现及电控制方法。

Both Nan-Geng 15 and Zhong-Bai 4 have two linked dominant genes with crossover value 30% operating in the 3 strains at booting stage.

南粳15和中百4号均由两对连锁的显性基因控制，交换值为30%。

Control of Speed With Frequency Conversion for Crowned Taper Roller Superfinisher

圆锥滚子凸度超精研机的变频调速控制

Control of Crustacean Plankton in Water Treatment Process

水处理工艺中浮游甲壳动物的控制

Introduce the Soft/ Hard ware Structure and of Raw Materials Automatic Control System at North Zone of Blast Furnace Plant of Tang-Steel. As well as introduce the Design thinking and Optimized Functional Technical Program for Materials Demand of the three Blast Furnaces after enlarged cubic content.

本文介绍了唐钢炼铁厂北区原料自动控制系统的软/硬件结构、设计思路以及为满足炼铁厂三座高炉扩容后的原料需求而开发的程序、功能上的优化技术。

Biological systems are able to generate crystalline materials with complex morphologies and specific functions via the processes of biomineralization and these processes are elaborately controlled by some biomacromolecules.

生物体能够在生物大分子的精确控制下，通过生物矿化过程合成具有特殊形貌和功能的生物矿物。

The Control and Influence on Engine Turbine Blade Property of Crystalline Grain Quantity

晶粒度对发动机涡轮叶片性能的影响及其控制

A stable nanometered TiO_2 colloids were prepared from the hydrolysis of titanyl organic compounds by controlling the reaction conditions. The X-ray diffraction and scan electro microscopy ( SEM) revealed that the colloidal TiO_2 was in an anatase crystalline particle form with a diameter of 12 nm.

控制钛氧有机物水解条件合成稳定的纳米二氧化钛胶体，X射线衍射和扫描电子显微镜研究表明，该胶体的胶粒为锐钛矿型晶体，晶粒大小约12nm。

It was found that the overheating of material during heat treatment led to coarse crystalline grains.

结果表明：由于热加工时加热温度控制不当，使泵体过热而导致晶粒长大，强度下降。

This paper briefly introduces Neural Networks and by applying Neural Networks on the data of Gyratory Crusher as examples, it analyses and discusses the application of Network in prediction, classification and control on mine equipment.

介绍了Neural Networks技术，并通过其在旋回式破碎机数据上的应用实例，分析和讨论了该Networks在矿山设备的预测、分级及控制方面的应用。

Engendering and controlling of blemish in manufacturing in crucible furnace

坩埚窑生产中缺陷的产生及控制

Discussion on Subgrade Quality Filled by Crushed Aggregates

控制碎石土填筑质量问题的探讨

Synchronous Control for Crankshaft Grinder Head-tail Stock Based on AC Servo

基于交流伺服驱动的曲轴磨床头尾架同步控制方法

The design and application of fuzzy control to the current adjustment of an ore crusher

铁矿石破碎机电流模糊控制的设计与应用