有限的例句大全

By uses of contract theory, based on owner's and contractor's expected utilities, this paper creates three kinds contract incentive models, they are 2 levels limited liability Contract, cost-plus fixed percentage fee Contract and share distribution formula Contract.

文章应用契约理论建立基于业主和承包商期望效用的两种水平的有限责任合同、按固定份额分成合同、按约定公式分成合同等三类合同模式的激励模型。

Finite Element Analysis of Bearing Performance of Viaduct Steel Cap

高架桥钢盖梁的承载性能有限元分析

Coke oven gas and coke are the main products of the Gas Business Co., Ltd. in XX city. Coke oven gas becomes the gas source for urban pipelines after purification. And the coke can be distributed to the steel corporations for pig-iron smelting.

XX城市煤气股份有限公司的主要产品是焦炉煤气和焦炭，其中焦炉煤气经净化后作为城市管道燃气气源，焦炭通过市场销售给钢铁企业用于生铁冶炼。

Finite Volume Element Application in Containment Shell Numerical Simulation Under Blast Shock Wave

有限体积元法在安全壳抗爆数值模拟中的应用

The software ANSYS/ LY-DYNA has been employed to analyze transient dynamic response of a thin-walled conical shell subjected to a cosine pulse loading. As a result, Von-mises stress fields of this shell at different time moments are obtained to test its dynamic strength.

运用有限元分析软件ANSYS/LS-DYNA对在余弦脉冲载荷作用下某圆锥薄壳体的瞬态动力响应过程进行分析，得出了不同时刻下壳体等效应力场的分布，考察了该壳体结构的动强度性能。

A Finite Element Method of Camber Parameter Synthesis of the High-speed Corrugating Roll Mechanism

高速瓦楞辊机构凸度参数综合的有限元法

Ansys Analysis of Inside Heat Transfer Enhancement of Corrugated Tube

波节管管内强化传热有限元Ansys分析

Correlation energy of double electron system obtained by using B splines basic sets

采用B样条有限基集获得等电子系列基态关联能

Based on the Reissner Mindlin type global displacement field, a predictor corrector method for finite element analysis of laminated composite shells was introduced.

对于复合材料层合壳的有限元分析，本文根据Reissner-Mindlin型的全局位移场给出了一个预测-修正法。

Based on the Reissner Mindlin type global displacement field and predictor corrector method, the deflections and transverse shear stresses were investigated for laminated composite cylindrical shells under mechanical load.

本文根据Reissner Mindlin型的全局位移场（一阶和三阶），应用有限元预测&修正法，数值计算和分析了机械载荷作用下复合材料层合圆柱壳的挠度和横向剪应力。

It is a finite element solution of Reynold's equation, with which the continuity condition of flow is directly combined.

它是在雷诺方程有限元解法基础上，将流量连续方程代入归并，从而无需迭代、直接解出。

In this paper, a finite element method analyzing the big end of a con-necting rod with the elastic contact condition is presented.

本文对连杆大端提出一个按弹性接触条件求解的有限元方法。

Nonlinear finite element analysis for saturated soil consolidation

饱和土壤固结非线性有限元分析

Simulating Saturated Soil Consolidation with Heat Field Analysis by Finite Element Method

模拟饱和土固结的有限元热力场分析

A Supervise Color Constancy Algorithm Based on Finite-dimension Linear Model

基于有限维线性模型的监督颜色回归恒常性算法

Using the Non-linear analysis technology of ANSYS software, the three-dimension finite element model of radial tyre is built with three-dimension volume element, layer element and contacting element.

采用ANSYS软件非线性分析技术，通过三维体单元、层单元和接触单元，建立了60系列的R15型子午线轮胎的三维有限元模型。

The research on contacting finite element model for downhole packer

井下封隔器接触有限元模型研究

The analyzing method of the contact problems and engineering application is researched basing on Hertz contacting theory and finite element method.

本文主要以赫兹接触理论和有限元法为理论基础，对接触问题的分析方法和工程应用进行了分析和研究。

Research on numerical technique of whole large container ship by FEM

大型集装箱船整船有限元分析计算技术研究

A basic model of hybrid bearing lubrication mechanism is established based on Reynolds equation and flow continuity equation and those equations are solved by using finite difference method.

以雷诺方程和流量连续方程为基础建立了液体动静压轴承润滑机理的基本模型，利用有限差分法来求解雷诺方程和流量连续方程。