机的例句大全

Design of Continuously Variable Angle Valve Gears

连续可变相位配气机构的设计

Analysis focused on the valve timing of exhaust valve opening time, intake valve close time, valve overlap angle, valve lift and intake system parameters on the performance of the engine.

讨论了气门正时中排气门打开时刻、进气门关闭时刻、气门重叠角，气门升程和进气系统参数变化对发动机性能的影响。

Second, the DDA method is used to study the scattering and polarization property of randomly distribution aggregation particles, and the angle distributions of Muller scattering matrix element under different conditions are elicited.

研究了随机分布的簇团粒子的散射特性和极化特性，给出了Muller散射矩阵元在不同情况下的角分布；

Modified Monte Carlo techniques by rotating slip segments for searching general critical slip surface(ⅰ): random angle of rotation

基于滑面段旋转的Monte Carlo搜索技术及改进（Ⅰ）：转角大小随机

Drawing Relation Curve of Bragg's Diffraction Intensity and Angle of Reflection with the Aid of a Computer

用微机绘制布拉格衍射强度与反射角的关系曲线

Angle of inclination of conveyor in degree.

为皮带运输机的倾角，度；

A relationship between the energy consumption due to particle breakage, angle of friction, dilatancy, and deviator stress ratio was derived.

对钙质砂的颗粒破碎机理进行分析，给出了关于破碎消耗能量、摩擦角、剪胀与偏应力比的关系式。

Design for blower static blade angle of electric displacement instruction and its application

鼓风机静叶角度电位移指示的设计应用

Methods A CT scanning was done for 30 adult cadaveric heads. The distance and angle of the lateral deviation from anterior nasal spine to the varial structures of the orbital apex, structures and the adjacent relationship of optic canal walls and the superior orbital fissure were measured.

方法随机选取30例成人尸头进行CT扫描，对前鼻棘至眶尖部各结构的距离、侧偏角、视神经管及眶上裂各径线长度、毗邻关系等进行断层影像解剖观测。

Mathematical formulas are derived comprehensively and systematically for the profile coordinate, pressure angle and radius of curvature of the cylindrical cam with an oscillating roller follower.

推导了摆动滚子从动件圆柱凸轮廓线、压力角及廓线曲率半径方程，讨论了该种凸轮机构在各种运转情况下与之相适用的方程。

Nozzle flow field of SRM was numerically simulated with Fluent software. The effects of nozzle convergent half angle, radius of curvature on upstream of throat section and length of throat cylinder on flow field are investigated.

用Fluent计算流体力学软件对固体火箭发动机喷管流场进行了数值计算，研究了喷管收敛半角、喷管喉部上游圆弧曲率半径和喉部圆柱段长度对喷管流场的影响。

Computation of S_1-stream sheet of axial air compressor with small installing angle by use of streamline curvature method

小安装角轴流压气机S1流面的流线曲率法解

In this paper, the pressure angle and minimal radius of curvature of cam mechanism with swinging roller follower are discussed in details.

本文对摆动从动杆盘状凸轮机构的最大压力角和最小曲率半径问题进行了详细的讨论。

Analysis and experiment on the taper angle of contact surface of bend rotation ultrasonic micromotors

弯曲旋转超声电机接触界面锥形角的分析与实验

The simulation algorithms of wave high, yaw force, rolling moment and sway moment were put forward. Meanwhile, it also discusses the influence of roll yaw on sideslip in spin, and of moving round plumb line on angle of bank.

给出了随机海浪波高、横荡力、横摇力矩、艏摇力矩的仿真算法。同时就尾旋中偏滚对尾旋侧滑的影响、绕铅垂轴旋转对坡度的影响等进行了讨论分析。

The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.

门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。

It is presented that the differential pressure orifice flowmeter and the angle joint differential pressure measuring structure used in the test are the applied technologies of H2O2/ kerosene engine test.

提出了压差式孔板流量测量和角接式取压结构在过氧化氢/煤油发动机试验中的应用技术。

International Capital Flows and Financial Crisis Prevention: The Analyzing Angle from Capital Flight

从资本外逃角度看我国金融危机的防范

Development and Application of Computer-Aided Design System of Anchored Soil Bulkhead

土钉支护计算机辅助设计系统的开发及应用

The Study on Force Mechanism of Anchorage Zone with the Internal Anchorage Tool

构件体内的锚固区受力机理的研究