材的例句大全

The best composite was the one after backward extrusion and heat treatment.

其中力学性能最好的为反挤压后经过热处理的TiB2/Al-Si-Mg-Cu复合材料。

The competent customs office shall accept the application if the application materials are complete and valid.

申请材料齐全有效的,主管海关予以受理.

Special glass curtain wall materials and engineering will be the growth of the two driving wheel.

特玻材料和幕墙工程将成为业绩增长的两个驱动轮.

The result shows that torque, fatigue crack and material are the main reasons for the breakage.

认为扭振 、 疲劳裂纹及材质是导致万向接轴扁头断裂的主要原因.

Should say lumber market already entered autumn stage by stage now.

应该说现在木材市场已逐步进入成熟期.

Battery material is confirmed and copper alloy containing nickel.

经确认电池材质是铜合金并且含镍镀层.

Materials, including titanium, steel, copper, alloy and plastic.

材料包括钛 、 不锈钢 、 铜 、 合金和塑料等.

The copper alloy with high-strength and high-conductivity is base of IC and electronic element development.

高强 高导铜合金材料是集成电路和电子元器件发展的基础.

Thereby, Cu-Ag alloy prpeared by Ohno continuous casting is a new material with better wear resistance.

因此, 通过热型连续定向凝固技术生产的铜银合金是一种耐磨性较好的新材料.

Research on properties and application of GBW seal

GBW止水材料的性能及其应用研究

GBW seal, which will expand when water go in, is a new type of seal material. It can effectively resolve the sealing problems of settlement joints of concrete structures.

GBW遇水膨胀止水条是一种新型腻子型柔性嵌缝止水材料，可有效地解决混凝土结构的接缝止水问题。

Listening comprehension materials are good for training our minds.

听力材料对训练我们的脑子根有好处.

The physical performances of the ( three-dimensionally ) braided composite structure around a hole were discussed.

三维 编织复合材料的研究中,实际工程常用的带孔结构缺乏理论分析方法.

Objective : To measure cavity internal pressure when the abdominal compartment syndrome occurs through the simple equipment.

目的: 通过简单器材达到腹腔间隔室综合征(ACS) 时的腹内压测定.

To fix strips of maetal on the coiled material and then to smear the sealed plaster.

卷材收头,原则上采用金属压条加钢钉在预留凹槽内固定并用专用密封膏密封.

Coarse aggregate is one of the major constituents in producing concrete.

粗集料是配制混凝土的主要原材料之一.

For uniform isotropic materials, bending modulus of three point bending ( TPB) test and four point bending ( FPB) test are almost the same and they are almost equal to material ′ s tensile modulus.

对于均质各向同性材料，三点弯曲实验和四点弯曲实验得到的弯曲模量与拉伸模量基本上一致。

Software Automatic Generation System for Sheet Metal Bending FMC Operation and Control

板材折弯FMC运行控制软件自动生成系统

Characteristics of the polishing area are investigated by fluid jet polishing ( FJP) and removal mechanism of material in the experiment.

从实验出发，研究了液体喷射抛光中抛光区的特征及材料的去除机理。

Based on experiment, the influence of the process parameters of fluid Jet polishing ( FJP), including working pressure, working distance, jet angle and working time etc, on the removal rate of the workpiece is investigated.

以实验为基础，研究了液体喷射抛光技术的各工艺参数，包括喷射角、工作压力、工作距离和作用时间等参量对工件材料去除的影响。