极限的例句大全

The theoretical research approaches involve arched girder load split process, rigid-body limiting equilibrium process, plasmodium process, reliability theory, etc.

理论研究方法有拱梁分载法、刚体极限平衡法、变形体法、可靠度理论等。

Kuwait's only pure water aquiver is pushing its limits and it sells out everyday, two-thirds of it to the military. That'll take care of around a-third of the troops.

科威特唯一的纯净水源已经接近供应极限，它每天把三分之二的水提供给美军，而却只能满足三分之一军队的需要。

When the mass of axion approaches to zero, the above process expresses some similar characters to the conversion of the photons to the gravitons.

在轴子质量趋于零的极限条件下，上述过程和光子转化为引力子的过程表现出某些非常类似的性质。

The effect of axial tension on the ultimate strength has reasonably taken into consideration.

公式合理地考虑了轴拉力对拉扭构件极限强度的影响作用。

Determination of limiting audibility range in lecturing hall having natural speech acoustics

语言用厅堂在自然发声条件下听闻极限距离的确定

The limit weight-loss temperature of ore fines and coke are determined by rapid weight-loss measuring devise.

采用快速失重水分测量装置确定了富矿粉和焦粉的极限失重温度.

Then through the modal analysis get output axis of frequency and vibration model, analyzes whether it is to produce resonance, ask out of output axis limit rotational speed and working speed compare.

然后通过模态分析得到输出轴的频率和振型，分析其是否产生共振变形，求出输出轴的极限转速和工作转速做比较。

In this paper, the problem of limit cycle for a cubic system is studied.

摘要讨论三次系统(方程式略)的极限环问题.

Some important conclusions are drawn as cracking load, ultimate load and displacement of the model, etc.

此外,还得出了模型的开裂荷载 、 极限承载力及变形等重要结果.

An ultimate specific speed method checked by formula of manufacturer is proposed.

提出用极限比速法,并采用厂家公式校核的方法选取冲击式机组.

The Digital Signal Processors ( DSPs) can effectively support the arith-metic-intensive and real-time computations; Several Operational Method of the Limit it

数字信号处理器（DSPs）能够有效进行运算密集型的实时计算；极限的运算方法

Semi-ellipse area method of fatigue strength prediction for notch specimen

缺口疲劳极限预测的半椭圆面积法

The whole stability analysis and bearing capacity calculation of arched corrugated metal roof

金属拱形波纹屋面的整体稳定性分析与极限承载力计算

Rigid Block Ultimate Equilibrium Multiple Item Coefficients Method for Arch Dam Abutment Stability Analysis

拱坝拱座稳定的刚体极限平衡法的分项系数分析

The 3-D stability analysis for arch dam abutment

拱座稳定的三维极限分析

By increasing gradually the applied load, the damage propagation and the ultimate strength are obtained.

层合板的破坏扩展及极限强度通过逐渐增加载荷迭代求得。

Based on the limit equilibrium theory and the hypothesis of planar sliding surface, a formula for calculating the angle of shear failure was deduced considering cohesion and cut slope angle.

基于极限平衡理论及平面滑裂面假定，在考虑土黏聚力及放坡角度的基础上，推导了平面滑裂面剪切破坏角的数学表达式。

Probability Limit State Design Method for Determining the Depth of Single& anchored Sheet Pile Wall Penetrating into Earth

确定单锚板桩墙入土深度的概率极限状态设计法

Limit analysis of structures using the symmetric Galerkin boundary element method

结构极限分析的Galerkin边界元方法

The γ phase composition limit and the carbon content width in two phase WC-Co cemented carbides were derived according to the relations among all phases in aloys.

依据WC－Co硬质合金各相含量间的关系，推求出两相（WC＋γ）合金中γ相成分极限和碳含量宽度。