模拟的例句大全

Study on thermal capacity of endothermic hydrocarbon fuel by high-temperature calorimeter

利用高温热量计模拟研究吸热型碳氢燃料基础油的热管理能力

This system simulated in vivo the processes of cambium occurrence, cell differentiation and xylogenesis.

参照杜仲的剥皮再生经验建立了毛白杨的剥皮再生系统，该过程基本模拟了自然条件下形成层发生、细胞分化及木质部形成的过程。

The research proves that altitude live-low train can increase swimmers' red blood cell ( RBC), hematoglobin ( HGB), hematocrit ( HCT), and enhance the oxygen-transport ability in the body.

研究认为：模拟高住低练可使游泳运动员RBC、HGB、HCT升高，血液载氧能力增加。

The Technical Optimization Design of Numerical Simulation for the Blade Stamping Process of a Large Concrete Mixer Truck

混凝土搅拌车叶片冲压成形工艺的有限元数值模拟优化设计

Study on the Graphic Turbocharged Diesel Engine Cycle Simulation

涡轮增压柴油机图形化循环模拟技术研究

High speed diesel engine cycle thermodynamic simulation research by means of dual crank conrod mechanism

双曲柄机构高速柴油机工作循环热力学模拟研究

Study on Dielectric Property with Temperature Based on the Molecule Simulation Technique

基于分子模拟的二氧化硅介电常数温度特性规律的研究

It has designed the simulation disk intelligence dynamic management system, the main cording diagram dynamic management system, the power dispatch load report management system, the power dispatch information order bill management system, the network information issue system and the network Java curve data browsing system.

设计了模拟盘智能动态管理系统、主结线图动态管理系统、电力调度负荷收报管理系统、电力调度信息令票管理系统、网络信息发布系统、网络Java曲线数据浏览系统。

Finite Element Method Simulation on Precision Forming Process of Car Differential Gear

轿车差速器齿轮精密成形的有限元数值模拟

Numerical Simulation of Infinite Similar Element Method on Wave Diffraction

波浪绕射问题的无限相似单元数值模拟

Simulation for Etching Diffraction Grating by Use of Scalar Diffraction Theory

标量衍射理论模拟蚀刻衍射光栅

This paper aims at the development of rapid reconstruction of optical properties ( the absorption and scattering coefficients) based on the intensity of reflected diffused light.

发展了基于漫反射测量的适合于胃、宫颈等内脏薄层状组织光学参数重构的微扰蒙特卡罗模拟。

The function of exhaust diffuser is to transform part of momentum energy of exhaust gases from engine into pressure energy to simulate actual exhaust back pressure and environment pressure.

排气扩压器的作用是将发动机排出燃气的部分动能转换成压力能，真实模拟发动机排气反压和环境压力条件。

Simulation Investigation on Flow-Behavior of exhaust gas diffuser for a radial-inward-flow turbine

径流式涡轮排气扩压器流动性能模拟研究

Numerical Simulation for Atmospheric Diffusion Wind and Concentration Field in Mountain Area

山区大气扩散风场及浓度场的数值模拟

Modified embedded atom method for simulating the multilayer relaxation and self diffusion of copper

Cu表面弛豫和自扩散机制的修正嵌入原子法模拟

The sensitivity analysis of the model parameters reveals that liquid flow pattern on a tray is the most important factor affecting the result, while liquid flow distribution between pools and eddy diffusivity are shown to be insensitive parameters.

计算结果表明，塔板上液体流型是影响模拟结果的最主要因素，而各混合池间的流速分布和涡流扩散系数不是敏感参数。

Parameters Optimization and Experiments of Potato Digger Blade Based on Computer Simulation

基于计算机模拟的挖掘铲参数优化与试验分析

The phase transformation and microstructure of a C-Si-Mn TRIP steel during continuous cooling after ausforming were studied by hot simulation experiment machine. The continuous cooling transformation curves were drawn using thermal dilation method, and the influence of the cooling rate on the microstructure was analyzed.

利用热/力模拟试验机研究了C-Si-Mn系TRIP钢在不同连续冷却条件下的组织变化情况，用热膨胀法绘制了动态CCT曲线，分析了冷却速度对组织的影响。

The influences of acidity and dilution factor of simulated HLLW are studied.

考察了酸度和模拟高放废液（HLLW）的稀释倍数对萃取分配比的影响。