模拟的例句大全

For validating the validity of PFS-A, we used Matlab software to simulate PFS and PFS-A in the condition of varying user amount and varying data service.

为了进一步验证PFS-A算法的有效性，使用了Matlab仿真软件在不同用户数量、不同数据业务的条件下对PFS算法和PFS-A算法进行了模拟仿真，并对仿真结果进行了分析论证。

A concurrent permutation based multilevel matrix ordering strategy for parallel process simulation

针对复杂系统并行模拟问题的并发式多级矩阵重排算法

The nucleation of ordered phase is simulated by microscopic diffusion equation and the assumption of classical nucleation theory is examined.

利用微扩散方程对有序相成核过程进行计算机模拟，对经典理论的假设进行验证。

Simulation of Ordered Domain Interfaces Formed between DO_ ( 22) Phases in Ni-Al-V Alloy Using Microscopic Phase-Field Model

Ni-Al-V合金DO（22）相间有序畴界面的微观相场模拟

Numerical simulation of gas flow field in wearing resistance valves

耐磨风量调节阀气相流场的数值模拟

Its bearing capacity, coefficient of friction, and wearing value are measured by experiments.

通过滑道模拟实验，测定了这种滑道的承载力与压缩变形的关系，不同条件下静摩擦系数随正压力的变化关系，以及摩擦的时间效应、稳定磨损率。

Crack Control of Mass Concrete Foundation of Large Scale Shaking Table

大型模拟地震振动台大体积混凝土基础施工裂缝控制

The simulating test, high temperature test, low temperature test and shaking test show that the quality of the apparatus is good and can meet the practical use.

经过模拟调试和高低温、振动试验，表明该仪能够满足实际应用的要求。

Estimation of frequency characteristics of shaking table test system and its application

地震模拟振动台试验系统频率特性估计的研究及应用

The natural and controlled cooling technologies for Q ( 235) rolled angle steel have been simulated by computer. The detector was set at UV 235 nm.

对轧后Q235角钢的自然冷却和不同方案下的控制冷却技术进行了计算机模拟。检测波长：235nm；

Aimed at ungraded network carbon compound in heavy cross-section bearing steel occur during the cooling process of being cooled, which is caused by slow cooling speed, simulation experiment was carried on to study rolled metal clipped from field by using of home-made equipment in the lab.

针对大端面轴承钢在轧后冷却过程中由于冷速过慢引起碳化物网状不合问题，利用实验室自制设备，对从现场剪取的轧材进行了模拟实验研究。

The Evaluation of Flight Simulator Plans based on Gray Related Algorithm

基于灰色关联法的飞行模拟器方案评估

Tests show that the test-bed is stable operation, can meet the intended function. A life simulation test is done in a vacuum test chamber for a different load and speed, test environment selected high and low temperature and room temperature in vacuum.

试验证明该实验台运行稳定，能满足预定功能。在真空高低温试验箱内进行了不同载荷和转速下轴承寿命模拟试验，试验环境选择了真空常温和真空高低温。

The Elastoplastic FEM Simulation of Free Bulge Forming of Metal Tubes under Internal Pressure and Axial Compression

金属园管在内压及轴向压力作用下自由胀形的有限元法模拟

The finite-element analysis of bulging process has been made to investigate the effects of geometry of the magnetic impulsive forming system on the final deformation.

通过铝板毛坯胀形过程的有限元模拟，分析了磁脉冲成形系统几何参数对终态变形的影响。

Key technology research and application development on post-processing of skin stretch forming simulation system

基于蒙皮拉形模拟系统的后处理技术及开发

This paper mainly consists of following parts: The approaches used to determine the analytical forcing function of target response are systematically studied in detail, which include empirical, analytical and computational methods.

因此本文主要内容包括以下几个方面系统地研究了确定靶体响应力函数的方法。靶体响应力函数的确定方法主要包括经验和半经验公式法、理论分析法和数值模拟法。

Phase-field Simulation of Dendritic Growth of a Binary Alloy Under a Forced Flow

相场法模拟对流作用下铝合金的枝晶生长

Simulation of Dendritic Growth Shape of Isothermal Polycrystalline Binary Alloys in a Forced Flow

数值模拟流动下等温多晶粒枝晶生长形貌研究

Simulative supercritical helium forced flow cooling system

模拟超临界氦迫流冷却系统