润滑的例句大全

Bearings must be lubricated periodically.

轴承必须定期润滑.

Ceramic friction pairs operating in temperature environment must be properly lubricated.

工作于高温环境中的陶瓷摩擦副,其润滑问题必须得到解决.

Also the fill medium can lubricate the internals and provide a longer gauge life.

通过向表内充油,对仪表内部零部件起到润滑作用,延长了仪表的适用寿命.

Lightly lubricate pilot bearing with Mopar & reg; high temperature bearing grease.

用Mopar & reg; 高温轴承黄油轻轻地润滑引导轴承.

Spraying circulation is adopted to lubricate the gears, reducing noise and prolonging the service life.

齿轮传动采用喷淋式循环润滑供油系统, 降低噪音,增加齿轮工作寿命.

Check and clean bearing body, lubricate it.

检查并清洗轴承体, 加润滑油.

Lubricate of main bearing is ensured by oil supply interlock system.

供油联锁系统对确保主轴的润滑起到了保障作用.

Air regulator, with two cups, reduce the rust for the cylinder and lubricate the cylinder.

油雾器, 采用双杯油雾器, 即可减少水对气缸的锈蚀又能起到润滑气缸的作用.

Spaying circulation is adopted to lubricate the gears , thus reducing the noise and prolonging thethe gears.

齿轮润滑采用喷淋式循环,减少噪音,延长齿轮使用寿命.

You Shou 1 d lubricate the wheels of your bicycle once a month.

你每月应该给自行车轮上一次润滑油.

You should lubricate the wheels of your bicycle once a month.

你应该每个月给自行车轮子加一次润滑油.

To lubricate the bearing.

给轴承加润滑油.

Clean, inspect and lubricate machinery.

负责模具的清洗 、 检测和润滑.

Clean or replace the diaphragm and lubricate the stem, if necessary.

清洗或更换隔膜, 如果必要的话,润滑阀杆.

Petrochemical Products, Kerosene Oil, Bitumen , Base Oils, Oil and Lubricants, Oil, Oil.

采购产品石化的产品, 煤油油, 柏油, 基础油, 油和润滑油, 原油, 燃料油.

Also available for spices, thickeners lubricants, rubber processing aid, varnish drying agent.

也可作香料 、 润滑油的增稠剂 、 橡胶加工助剂 、 清漆催干剂等.

Acting Mobil Esso lubricants, hydraulic oil, gear oil products, price concessions.

代理美孚埃索润滑油, 齿轮油液压油等系列产品, 价格优惠.

The use of grease-based lubricants inside the vacuum system is not permitted.

不允许在真空室内使用油脂润滑剂.

Sulfurized vegetable oils. Contains 25 % of combined sulfur as extreme pressure lubricants.

硫化的植物油, 包含25%的化合硫,同极压力润滑剂一样.

Materials and accessories: die steel, lubricants , release agents, processing fluids, rust etc.

材料及辅料: 模具钢材, 润滑油 、 脱模剂 、 加工液 、 防锈剂等.