焊的例句大全

Effect of hydrogen on fatigue crack propagation in bond weld fusion zone

电解充氢对堆焊熔合区疲劳裂纹扩展行为的影响

According to the unevenness of concave welding joint, it studies dynamic performance of high speed trains running on the slab track.

针对焊接凹接头不平顺，研究高速列车通过板式轨道时的动力学性能。

The paper introduces repairing technology and method of hydraulic press in detail.

本文详细介绍了水压机主柱塞的堆焊修复工艺与方法.

Defects in welds are classified by using numerical characteristic values of statistical distribution and "Fisher linear discrimination method" for pattern recog-

用统计分布的数字特征值和图象识别中Fisher线性识别方法区分焊缝中的各类缺陷。

Culture Region Susceptibility of liquation crack in HAZ of nickel base alloys

镍基合金焊接热影响区的液化裂纹敏感性

The study of electrode for line pan of scraper conveyer

刮板输送机中部槽耐磨焊条研究

NIB-SEAL on sweat ball valves are shipped unassembled.

在焊接球阀上,NIB-SEAL在装运时处于未组装状态.

Calculation of R _ ( min ) for flux or slag is of signifi-cance in welding, ESR and protective casting.

不同熔剂或熔渣的R_ ( min ) 计算值对电渣重熔、保护浇铸及焊接的工艺过程有一定指导意义.

Ultrasonic flaw location in semisphere butt welds by sound path method is described.

介绍半球对接焊缝超声探伤的声程定位方法.

Application and Welding of the Steel of the Boiler in Power Plant

电站锅炉用钢及其焊接

Bond area characteristic of joint strip electrode electroslag surfacing using ultra-low-carbon austenitic stainless steel

超低碳奥氏体不锈钢带极电渣堆焊接头的熔合区特征

Bond Area of Two Welded Metals Is Actually Interfacial Phenomenan in Cold Pressure Welding

金属冷压焊界面结合机理探讨

The use of shear studs on the steel could avoid the bond failure.

在钢骨上焊接栓钉的构造措施可避免粘结破坏。

The results show that the most nonuniformity of mechanical properties and micro structure is located in the bond of the welded joint, and the bond is the weakest zone of the welded joint.

结果表明，在熔合区组织不均匀性与力学性能不均匀性最为严重，是焊接接头最薄弱的环节。

Bond and Life Bond strength and splice zone of welded wire fabric in reinforced concrete slabs

焊接钢筋网在混凝土板中的粘结和搭接长度

Study on the automatic control of plasma building-up welding process based on RMP

面向RMP的等离子堆焊过程自动控制技术研究

The Ag-Cu eutectic+ TiH2 active powder brazes were investigated to reduce cost and control the content of Ti.

在此基础上以降低成本、灵活控制Ti元素含量为出发点，自行配制Ag-Cu共晶+TiH2活性粉末钎料，进行Al2O3陶瓷与Kovar合金的钎焊连接。

The whole thing involved mounting four or five valves on a breadboard, and no more. He had no delay line to work with.

他在面包板上焊了四、五个真空管，然后就扔在那里，因为他没有延迟线可以用。

Bubble Chamber Stress Analysis of the Bonding Container in Continuous Extrusion Forming

连续挤压模具型腔焊合室应力分析

Even then the boilers often burst or came apart at the seams.

甚至那时的锅炉也经常从焊接处爆炸或裂开