焊的例句大全

The supporting structure may be assembled with bolts or rivets or by welding.

支撑的结构可以由螺钉或铆钉或焊接的方法组装起来.

The supporting structure may be assembled with Bolts or rivets or by welding.

支撑结构的组装可用螺拴、铆钉或焊接.

The stainless steel welded edges are rust preventive, as well as aging preventive for the gaskets.

不锈钢焊接边缘防锈, 以及预防老化的垫圈.

Pneumatic pressing spot welder made in Japan Autoclaved aerated concrete slabs

日本空气加压D点焊机GB15762-1995蒸压加气混凝土板

Technical analysis of YC-TSP series argon tungsten pulsed are welding machine made in japan

日本YC－TSP系列钨极脉冲氩弧焊机技术分析

304 steel plate made in Japan, adopting the inferior arc welding;

不锈钢挂件为日本的304板材，采用亚弧焊；

This paper introduces the basic condition of the friction welder made in Japan.

本文介绍了日本摩擦焊机生产及应用的基本情况。

The method of active and deactive element was employed to simulate the problem of molten zinc on galvanized steel sheet on the simulation of spot welding, which make the model tallys with the practical thing.

在镀锌钢板的点焊过程模拟中采用生死单元法解决了镀锌层熔化的模拟问题，从而使模型更加符合实际情况。

Study on ancillary rectifier circuit parallelled in single phase thyristor rectifier welder

单相晶闸管整流焊机并联整流支路的研究

It can extend the minimum current of 30 A to about 5 A that a ancillary rectifier circuit parallelled in a single thyristor rectifier welder.

在单相晶闸管整流焊机中，并联带有交流和直流电感的整流支路，能把电流下限从30A扩展到5A左右。

According to field experience, this paper analyzed the structure feature, welding shortage and reason of large-scale heat exchanger ( e.g. horizontal pipe gas-cooling machines, rectangular parallelepiped) and the main technology and optimized measures in key step during manufacturing.

结合现场施工实践，分析了大型换热器（横管式煤气冷却器，外形为长方形）的结构特点、焊接缺陷与产生原因，以及制造中关键环节应采取的主要工艺及优化技术措施。

Establishment of quality inspection standard for welding.

制定焊接质量检验的标准.

Inspection welding seam and dimension of cargo hatch cover.

货舱舱口盖焊缝和尺度检查.

To introduce the constant tension control principle of spool take-up in welding wire Cu-plating production line.

介绍焊丝镀铜生产线工字轮收线机的恒张力控制原理,推导出收线电机的力矩随着卷径的增加同比例增加的规律.

Standard for welding technology of oil and gas pipeline.

油气管道焊接工艺评定方法.

The national standard prescribed different kinds of groove forms and groove sizes for steel welded joints.

本标准规定了钢焊接接头的各种坡口形式与坡口尺寸.

Good training program in hand soldering and periodic operator evaluation is conducted.

对手焊锡工人有良好的培训计画,并定期对工人作技术考核及评估.

Adopted sensitive micro-K thermocouple detector provides quick and accurate temperature measurement of a tip.

采用敏感的微型K热电偶传感器,准确快捷测量焊咀温度.

Technical specification for welding of croloy piping in petrochemical engineering.

石油化工工程铬钼耐热钢管焊接技术规程.

This paper describes the history and development of the temperature field and residual stress field.

本文主要讲述了有关焊接温度场与应力场的研究历史与发展.