焊接的例句大全

Braking resistor between the components and elements welded together.

制动电阻器元件和元件之间焊接而成。

Experimental Studies on the Bend Deformation of Welding Structure

焊接结构弯曲变形实验研究

Application advantage of CCAW ( copper clad aluminum wire) and processing technology of clad-process welding CCAW were introduced. The effect factor of solid-state bonding during drawing the bimetal wire was analyzed.

介绍了铜包铝线的使用优点和包复焊接铜包铝线加工工艺过程，分析了通过双金属拉拔实现金属间固相结合的影响因素；

FXD does not have any free carbon in the preheat flame and does not blow back in the torch.

FXD的预热火焰没有自由碳，不能进行黑色金属之间的焊接。

Since 1996, railway passenger car started to use the welded bogie to replace the original casting bogie, the corrosion was quite serious.

自1996年以来，铁路客车开始采用焊接转向架替代原铸造转向架，腐蚀情况相当严重。

Optimization design of welded bogie frame for high speed power car

高速动力车转向架焊接构架优化设计

Engineering method of evaluating fatigue strength for welded bogie frame

焊接转向架构架疲劳强度评定的工程方法

Explosive bonding for large thick stainless stell and billet

大型不锈钢/普碳钢厚板坯的爆炸焊接

Study on Process Model of Ultrasonic Bonding

超声焊接的研究和工艺模型

Design of ultrasonic bonding systems based on mass customization

大规模定制下超声波焊接系统的设计

Study on the Technology of High Density Gold wire Ball Bonding under Normal Temperature

高密度常温金丝球焊接技术探讨

The control software for ultrasonic bonding machine is indispensable for the automatic production-lines run by manufactories making microcircuit chips.

超声波焊接机控制软件是国内外生产微电路芯片厂家自动化流水线的不可缺少的一部分。

Analysis and welding repair of cracks in a new type pump bonnet

新180泵头盖裂纹分析及焊接修复

Cracking analysis of brazed phosphorus deoxidized copper tube

磷脱氧铜管焊接漏气失效分析

Analysis of Weld Property and Temper Brittleness for Cr-Mo Steel

Cr-Mo钢的焊接性和回火脆性分析

The "P" shaped section is a holding area where circuitry and other parts can be soldered on.

的“P”形截面是一家控股的地方电路和其他部件可以焊接在。

The welding residual stresses exist mainly within 15 mm from the brazing seam.

焊接残余应力主要分布在离钎缝15mm以内的区域。

The Influence of Brazing Metal on Residual Stresses in Brazed Joints of Ceramic-metal

钎料对金属/陶瓷钎焊接头残余应力的影响

Joint strength and fracture analysis of arc brazing with Cu based filler metals

Cu基钎料电弧钎焊接头强度及断口分析

It's also superior for braze welding of steel.

这对钢的黄铜焊接也是较优的。