熔的例句大全

The structure and properties of the weld fusion-zone in an aluminized article have been investigated.

研究了渗铝件焊接熔合区的组织与性能.

The metallurgical properties ( Viscosity, free running temperature etc.) of medium-content titania ( TiO 25%~ 15%) bearing blast furnace slag were systematically investigated by means of regression design of mixed burden and single component design.

采用了混料回归设计和单成分设计方法，系统地研究了中钛型高炉渣（TiO25%～15%）的粘度、熔化性温度等方面的冶金性能。

With the increasing of reduction grade the viscosity and free running temperature of slags would have rising tendency.

随着钛氧化物还原度的提高，炉渣的粘度和熔化性温度总体呈上升趋势。

Through analysing the change of the melt vapor pressure, surface tension and contact angle of the drop, we can explain the growth process of single, bundle and special morphology MgO whiskers.

通过熔体的蒸气压，液滴的表面张力和接触角的变化解释了单根、单束及特殊形貌的氧化镁晶须生长过程。

Ta and Nb possess the superiorities of high melting point, good ductibility, low vapor tension, causticity-resistant and high thermal conductivity and so on. They are the important raw materials of electronic, atomic, space navigation, steel and chemical industry, etc.

钽和铌具有熔点高，延性好，蒸气压低，耐蚀性强和热导率大等优良特性，是电子、原子能、宇宙航行、钢铁、化工等工业的重要原料。

A study of D-D fusion in TiD target induced by ￣( 197) Au bombardment

~（197）Au束轰击TiD靶引起的D&D熔合研究

A.C. Breaking-Capacity Tests on Fuses

熔断器交流分断能力试验

The results showed that the change of raw material, production load, production process parameters and other abnormal factors will do damage to the melt evenness, spinning stability and yarn quality.

研究表明：原料的改变，生产负荷的改变，生产工艺参数的改变及其他一些异常因素都会影响熔体的均匀性，纺丝的稳定性和丝的品质。

However the laser cladding of iron-based alloy brings some problemsas crack, oxidation , burning loss, hole.

工艺的选择等方面着手解决了铁基合金的激光熔覆中存在的容易开裂 、 容易氧化 、 容易产生气孔等问题.

This paper investigated the hydrogen effects on facture toughness in the fusion area of stainless steel weld overlay.

研究了氢对不锈钢堆焊层熔合区的断裂韧性的影响作用。

Fracture Toughness Investigation of the Fusion Area of Stainless Steel Weld Overlay Specimens Before and After Hydrogen Charging

不锈钢堆焊试件熔合区充氢前后的断裂韧性研究

X-ray diffraction determination of stress relax in laser melted area of stainless steel

激光熔区中应力缓解的X射线衍射法测定

They are characterized by the high-Al and low-Fe and-Mg composition and high Sr and O isotope ratios. Geochemical study shows that they are the product of anatexis of argillaceous rocks and fractional crystallization of magmas.

岩体以高铝、低镁铁组分，高锶、氧同位素比值为特征，地球化学研究显示它们是泥质岩的深熔作用和岩浆的结晶分异作用所形成的产物。

New version IEC 60947 3 standard low voltage switchgear and controlgear part 3: switches, disconnectors, switch disconnectors and fuse combination units was introduced. It will be substitution for 1990 version IEC 947 3 same name standard.

本文介绍了1999年新版IEC609473《低压开关设备和控制设备第3部分：开关、隔离器、隔离开关以及熔断器组合电器》标准，它将替代1990年版IEC9473同名标准。

I choose melt into the stove to change into the boiling hot steel.

我选择熔入炉中化为滚烫的钢水.

On the third evening a stream of lava boil up from the centre of the volcano.

在第三天晚上,一大股熔岩从火山中奔腾涌出.

Two-way automatic slipway, back-forth model continuous automatic feeding, accurate-orientation.

双向 自动滑台,往返式连续送料熔接, 定位精准.

Thus, this fuse has good performance and big breaking capacity.

所以, 这种熔断器性能良好,开断容量大.

Its mechanical intensity is greater than fused alumina, but is brittle and very sharp.

其力学强度大于熔融氧化铝, 但脆性也很尖锐.

This paper has studied the synthesis of hot-melt road marking paint using modified rosin-alkyd resin.

本论文研究了热熔型改性松香 - 醇酸树脂路标涂料的制备.