熔的例句大全

The characteristics, applications, and recent situation of development of moisture-curable polyurethane hot melt adhesive are introduced.

简要介绍了湿固化聚氨酯热熔胶的特点 、 应用和发展近况.

Uses: For making glass, ceramics, flux of metal smelting & refractory brick, etc.

用途: 供制造玻璃 、 瓷器 、 冶炼金属熔剂 及 耐火砖等.

Study on the Experiment and Measurement for Wireless-fuse Crossing High-speed Goal Difunctional Fuse Resistor

多卜勒引信的弹目交会模拟实验与测试系统研究双功能熔断电阻器

To dye the polyester stretch fabric with disperse dye by thermosol process.

该文就热熔温度对涤纶弹性带弹性的影响及防泳移剂的用量做一讨论.

Flux performance above all with the glass similar coefficient of thermal expansion is too large.

助熔剂的本能机能最轻给的是跟被印玻璃的冷扩张解数相不差不太不小.

Fused salt electrodeposition, magnetron sputteringand chemical vapor deposition were also methods of preparing platinum composite electrode.

此外,铂电极复合方法还有熔盐电镀, 磁控溅射,化学气相沉积等,指出了各种方法的优缺点及发展方向.

Titanium carbide, titanium nitride and titanium carbonitride have an extensive application in mechanism, chemical and microelectronic industry for they have a series of excellent properties such as high melting point, big hardness, good chemical and thermal stability.

TiC、TiN和Ti（C，N）系列含钛化合物具有熔点高、硬度大、化学和热稳定性好等一系列优异的性能，在机械、化工、微电子等领域有着广泛的应用前景。

With increase of infiltration temperature, the amount of CrW solute increases, which leads to the increase in hardness and breakdown voltage, but the decrease of electrical conductivity and chopping current on the condition of the same Cr content in the CrW/ Cu composites.

CrW/Cu复合材料中，对Cr含量相同的配比，随着熔渗温度的升高，基体中CrW固溶体增多，材料的硬度、耐电压强度升高，电导率、截流水平则降低。

Development of DFU Molten Aluminium Refining Unit

DFU铝熔体净化装置的开发

A Study on Vacuum Refining Ultra-Low S and Low P Medium-Carbon Steel with CaO-Based Premelting Slag

石灰基预熔渣真空精炼超低硫低磷中碳钢的试验研究

The Application of FBE Coating in Tianjin-Beijing Product Oil Pipeline

熔结环氧覆盖层在津京输油管道上的应用

Influence of misalignment between SMF and FMF on depth of modulation ( DM) was calculated.

论文仿真了少模光纤干涉仪中光纤熔接对准误差与调制深度的关系。

The semi-Solid Forming technique of low melting point alloy has been used in commercial production.

低熔点合金 半固态 成形技术被专家称为21世纪新兴的金属制造关键技术.

Study on control of GMAW process parameters based on ODBC database technology

基于ODBC数据库技术的熔化极气保焊工艺参数控制技术的研究

Deposit metal samples are prepared by GMAW shielded with different gases in copper mould with cooling.

采用不同配比的保护气体,在水冷铜模中堆焊焊缝金属,获得不同扩散氢含量的熔敷焊缝试棒.

Analytical model for dynamic process of metal transfer in pulsed GMAW

脉冲GMAW熔滴过渡动态过程的解析模型

Control mode of GMAW penetration based on numerical simulation

基于数值模拟的GMAW焊接熔深控制模型

Assessment of Using Power Ratio Indices GMAW Metal Droplet Transfer Mode

利用功率比指数对气体保护焊熔滴过渡模式的实现

Experimental Study on Single Event Latchup of Anti-fuse Field Programmable Gate Array

反熔丝型现场可编程门阵列单粒子锁定实验研究

Thermal barrier coatings had been prepared by laser cladding method.

采用激光熔敷方法在铝合金表面制备一层金属陶瓷耐热涂层.