熔的例句大全

The Xunyi tea dust wares belonged to Yaozhou ware system, the flux in the glaze was fairly high, the main crystal phases were augite and anorthite.

旬邑茶叶末瓷属耀州窑系，其釉的熔剂含量较高，主晶相为普通辉石和钙长石。

Heat Transfer Behavior of Atomized Droplets During High Velocity Arc Spraying

高速电弧喷涂雾化熔滴的热传输行为

Characteristics of particle formed by plasma arc melting centrifugal atomizing spray process

等离子体熔化离心雾化喷涂粒子的特性

An atomistic simulation of structural evolution and melting characteristics of Pt nanocrystal during continuous heating

铂纳米晶在升温过程中结构演化与熔化特征的原子级模拟研究

The thermal spraying and spray welding are used to strengthen the wearing surface of parts extensively.

热喷熔和热喷涂技术被广泛应用于机件的耐磨强化.

The main materials are high quality bauxite, fused corundum and high-purity spinel etc.

采用优质高铝矾土 、 电熔刚玉和高纯尖晶石等做为主要原料.

Excellent corrosion resistance with ESR-melted. 13 Cr-Mo stainless steel with high hardness.

耐磨蚀性优良的电渣重熔13铬钼不锈钢,不需施以镀铬.

Glass ceramics using converter slag as a raw material were prepared by the melting method.

以转炉渣为原料,采用熔融法制备转炉渣微晶玻璃.

Microstructure and Properties of WC-steel Composite Coating Produced by Argon-arc Welding

氩弧熔覆WC-钢结硬质合金涂层组织性能研究

Metal argon arc welding of red copper and low carbon steel

紫铜与低碳钢的熔化极氩弧焊

Study on microcomputer control system of weld penetration in argon arc welding using infrared monitor

红外检测钨极氩弧焊焊缝熔深微机控制系统的研究

The process conditions in the stages of esterification, melt polymerization and solid state polymerization were discussed.

讨论了酯化反应, 熔融聚合,固相聚合阶段的工艺条件.

MIG Welding Quality Diagnose Based on Arc Light Spectrum

基于电弧光谱的钢熔化极惰性气体保护焊质量判识

Study on arc light sensing of keyhole behavior in plasma arc welding of stainless steel

不锈钢等离子弧焊熔池小孔行为的弧光传感研究

Sensing Droplet Transfer Mode by Arc Light Radiation in Pulsed MIG Welding Using a Aluminium Alloy Electrode

铝合金脉冲MIG焊熔滴过渡的弧光传感

However, it is very difficult to view the metal transfer process directly during welding, for the strong interference from the arc light.

但是在强烈的焊接弧光下，很难观察的熔滴过渡的过程。

The relationship between the keyhole behavior and arc light emission flux is studied by spectroscopic method in plasma arc welding of stainless steel.

针对不锈钢穿孔等离子弧焊过程，熔池小孔的特征行为与弧光光谱辐射强度之间的关系进行了光谱试验研究。

Clear images of the MIG welding pool are obtained by using the technology of narrow band filter, which used to overcome the influence of strong arc light.

通过窄带滤光结构，有效地克服了弧光干扰，并获得了比较清晰的铝合金MIG焊熔池图像。

In the process of laser cladding, there were noise caused by powder splash, arc light and dust, so it was necessary to pre-process images to get useful information.

由于激光熔覆过程中存在粉末飞溅、弧光和烟尘等噪声干扰，在提取图像有效信息时对图像进行处理。

Based on the arc light spectrum theory, the auxiliary lighting source and composite filtering techniques were used to solve the negative factors such as poor resolution and radiation disturbance by weld pool.

依据弧光光谱理论，采用辅助光源及复合滤光技术，有效地解决了焊接区熔池成像的干扰和清晰度差等问题。