熔的例句大全

By means of zone melting recrystallization ( ZMR) method, polycrystalline silicon thin films with large grains and relative high carrier mobility were obtained, which could act as a seeding layer.

提出了一种简化的区熔再结晶方法，利用这种方法在非硅衬底获得了晶粒尺寸达到毫米级、致密的籽晶层。

Conventional dyeing processes for polyester, such as HTP and thermosol dyeing process, are suitable for flame retardant finish using YHD.

常规的涤纶染色方法和工艺，例如高温高压法、热熔法均适于用YHD对涤纶织物进行阻燃整理。

Czochralski Growth and Study on the Defects of Large Size YVO 4 Crystals

大尺寸钒酸钇晶体的熔体引上法生长及缺陷研究

Relationship between the Synthesis of Nd 3+ ∶ YVO 4 Raw Materials and the Properties of Its Melts

掺钕钒酸钇原料合成与熔体特性的关系

Residual stress analysis has been investigated for Ni-base thermal sprayed coatings with laser melting and consolidation ( LMC) processing by means of X-ray diffraction ( XRC) method.

本文用X射线衍射法研究了45号钢基体上镍基热喷涂层经激光熔凝处理后的残余应力。

Due to the strong interplay with the other welding variables and periodic oscillations induced by the formation and detachment of droplet, the determination of WFS is very complex.

由于与其它焊接参数强烈耦合、以及熔滴周期性过渡的影响，送丝速度的确定非常复杂。

WCu composites have been used widely in the fields of electrical materials 、 electron 、 war industry and spaceflight due to their high strength and hardness, good electrical and erosion resistance.

W-Cu复合材料具有良好的导电性、抗熔焊性和高强度、高硬度等优点，目前在电工材料、电子、军工、航天等领域有着广泛的应用。

S Research on the response of the conveying and extrusion power of the polymer melt to the vibration force field ( VFF) was carried out with self amended Tanner constitutive equations.

本文采用自行修正的Tanner本构方程研究了塑料电磁动态塑化挤出机中熔体输送挤出功率对振动力场的响应。

At present basic theory and welding criterion of UPW are defective, research on welding mechanism and melt behavior of the welding region is not enough for the difficulty in study.

由于超声波塑料焊接是涉及多学科的交叉学科，研究难度较大，目前超声波塑料焊接的焊接基础理论和工艺规范还比较欠缺，对超声波塑料焊接机理和熔接行为研究不足。

A PbO flux method at high temperature in growing 92% PZN-8% PT relaxor ferroelectric crystal is reported in this paper.

本文报道了弛豫型铁电晶体92%PZN&8%PT的熔盐法生长。

Study of Fusion Mechanism of Halo Nuclear~ ( 11) Be+~ ( 208) Pb by Applying QMD Model

用QMD模型研究晕核~（11）Be+~（208）Pb的熔合机制

The effects of polymerization conditions in gas phase and the formulation and preparation of the chromium based polyethylene catalyst QCP 01 on catalyst activity and polymer melt flow index were investigated.

考察了聚合条件以及催化剂配方和制备工艺条件对气相法铬系聚乙烯催化剂QCP－01的聚合活性及产物熔体流动指数的影响。

THE DOUBLE MELTING PEAKS AND MORPHOLOGY OF POLY ( ETHYLENE TEREPHTHALATE) Tradition and Innovation: A Comparative Study of Proust and Balzac

聚对苯二甲酸乙二酯的熔融双峰与形态双峰并峙继往开来&普鲁斯特与巴尔扎克

THE DOUBLE MELTING PEAKS AND MORPHOLOGY OF POLY ( ETHYLENE TEREPHTHALATE) Tradition and Innovation: A Comparative Study of Proust and Balzac

聚对苯二甲酸乙二酯的熔融双峰与形态双峰并峙继往开来&普鲁斯特与巴尔扎克

Composition of Phases and Causes of Phases Formation in Laser Remelted Zone on Zn-Al Based Ceramic Film

锌铝基Al2O3陶瓷复合层上激光重熔区的相组成及成因

Analysis of the Splicing Loss and Polarization Properties of the PMF

保偏光纤的熔接损耗及偏振特性分析

GRUB, filth, grime, muck, gunk, slag, grit, grunge, smut, dross, dust, sludge, squalor.

肉蛆，污秽，积垢，湿粪，粘液，熔渣，沙砾，尘垢，油烟，残渣，灰尘，污泥，肮脏邋遢。

Simulation of material surface mechanical properties due to laser treatment with different MSZ coverage rates

激光熔凝覆盖率对材料表面力学性能影响的模拟

In chapter 3, the influence of MFV on the final part quality and dimensions is analyzed, and the problem is shown.

第三章分析了熔体前沿速度对制品质量和尺寸精度的影响，明确界定了本文所要解决的问题，并提出注射速率反演的数学模型。

The circuit breaker mechanism aims to check abnormal prices wings.

熔断机制的目的是遏制交易价格异常波动。