磨蚀的例句大全

The abrasion of water release structure is of the main technique problems on the Wanjiazhai Hydroproject.

泄水建筑物的磨蚀问题是万家寨水利枢纽工程的主要技术问题之一.

ZBD series is another ideal one to replace WARMAN pump of and anti-corrosion in AH series.

ZBD系列 是代替AH系列高浓度、强磨蚀WARMAN泵的理想节能换代产品.

Packaging for the middle-aged is primarily to conceal the funowsL ploughed by time.

中年人 的包装在于修复岁月的磨蚀.

The wind causes much wearing of rocks.

风使岩石遭到很大磨蚀.

HH-type pump for low concentrations of high-lift transport slurry or a concentration of high-lift low-abrasive slurry.

HH型 泵适用于输送低浓度高扬程渣浆或高浓度低磨蚀的 高扬程 渣浆.

Rain and frost are natural agents that wear away rocks.

雨和霜都是磨蚀岩石的自然力.

An abrasive material is unsuitable for cleaning baths.

有磨蚀作用的材料不适合擦浴缸.

Avoid abrasives, which can damage the tiles.

避免使用磨蚀剂，以免损坏瓷砖。

To wear a surface away by weathering, abrasion, or foreign particle.

因天气或外来颗粒等原因导致表面被磨蚀.

A defect caused by worn gears or dirts gathered on gears of a press cylinder.

是印刷机上的圆筒齿轮因磨蚀或污物堆积所引致的故障.

Erosion of pipes and vessels from abrasion by particles can be serious.

由于固体颗粒的磨蚀作用,管子和容器的磨损严重.

The chair has fretted into the wood and damaged it.

链条不断磨蚀木头,把它磨坏了.

The chemical composition of new type low nickel cast stainless steel is designed.

设计了新型低镍铸造不锈钢的化学成分,研究了该钢的组织及其腐蚀与磨蚀行为.

It will have erosive and abrasive effects on the pipe line.

它对管线有腐蚀、磨蚀作用.

Based on a new-abrasion theory, a high chromium alloy is designed.

根据新的磨蚀理论, 设计了一种高铬耐磨蚀合金.

There is an interactive effect between nouns and skills, the receptive skill of concrete nouns attrited most while the productive skill of concrete nouns attrited least.

名词和技能之间具有交互作用，具体名词的接受性技能磨蚀最大，具体名词的产出性技能磨蚀最小。

Inadequate resistance to wear will lead to rapid loss of clearances and drop in pump performance.

如果耐磨蚀能力不足,则将导致间隙迅速增大和泵性能下降.

The objection to the placer origin have centred around the softness of uranium compounds.

反对砂矿成因的论据主要是:铀的化合物不耐磨蚀.

Excellent corrosion resistance with ESR-melted. 13 Cr-Mo stainless steel with high hardness.

耐磨蚀性优良的电渣重熔13铬钼不锈钢,不需施以镀铬.

The running tests of the alloy coatings on the blade of hydraulic turbine produced using oxy-acetylene spray welding procedure manifested that the average service life of many different hydraulic turbine obtained a lot improvement after spray welding.

应用氧乙炔喷焊工艺在水轮机叶片上制备合金涂层，经过数台机组多年的实际运行，表明该材料抗磨蚀性能优异，喷焊后的水轮机叶片的平均使用寿命得到大幅度提高。