纹的例句大全

The Analysis of Small Scale Yielding Stress Field in a Crack Body

裂纹体小范围屈服应力场的分析

Preparation of Crackle Lacquer and Finishing for Security Door

防盗门用裂纹漆的研制与涂装

Computer aided system for implant cracking test

计算机辅助插销试验裂纹评定系统的研制

Principle and Application of the MR-100W Type Welding Restraint Cracking Test Machine

MR－100W型焊接拘束裂纹试验机原理及应用

Numerical simulation of Y-Slit Type Cracking Test

斜Y型坡口焊接裂纹试验的数值模拟

Numerical simulation of slit type cracking test for 9% Ni steel

9%Ni钢斜Y形坡口裂纹试验的数值模拟

Research on The Monitor of Delayed Cracking of Weldments with Laser-Holographic Interferometry

用激光全息法监测焊件延迟裂纹的研究

Reason Analyzed and the Precaution Measures About Delayed Cracking Appears on Cast Aluminum Alloy Housing

铸铝合金壳体产生延迟裂纹的原因分析及对策

The results indicate that welding at high temperature and in high humidity ambience results in higher delayed cracking tendency than welding at 0 ℃.

结果表明，在高温高湿环境中焊接比在0℃时焊接更容易产生延迟裂纹。

A study on hydrogen induced delayed cracking with implant test in z& direction

Z向插销试验氢致延迟裂纹的研究

Removing or damaging the shot-peened layer can reduce the protection that this compressive layer provides against fatigue and stress corrosion crack initiation.

喷丸压缩层的改变或损坏会降低压缩层抵抗疲劳和应力腐蚀裂纹的保护性。

The connecting sleeve is bolt jointed with the connecting screw via the left internal thread.

连接套筒通过左内螺纹与连接螺杆相螺接；

Analysis of Near Field Radiation Behaviour in a corrugated Conical Horn

波纹圆锥喇叭近场辐射特性分析

The cylindrical tube of the conical sleeve, which is provided with outer screw threads, is provided with at least one cushion ring and at least one screw nut.

安装在锥形套筒的外螺纹圆筒管上的至少一个垫圈和至少一个螺母。

Analysis of crack defect occurred on steam conduit of desuperheating water for boiler superheater of 600 MW Unit

600MW机组锅炉过热器减温水导汽管的裂纹缺陷分析与处理

Analysis of cracks in reheater steam conduit of boiler type DG1025/ 18.2 and corresponding countermeasures

DG1025/18·2型锅炉再热器导汽管裂纹分析及对策

By using finite element method and taking bolt material elastic-plasticity into consideration, the distribution laws of inner force and stresses in and deformation of a general triangle screwed bolt under the action of axial force were numerically calculated and analyzed.

采用有限元数值模拟方法，考虑螺栓材料的弹塑性性质，计算分析普通三角形螺纹螺栓&螺母副在轴向力作用下的内力、应力和变形规律。

The influence of temperature on cross-hatching

温度对菱形花纹的影响

Procedurally generated marbling textures can also be used for rendering objects and scenes directly.

由本系统生成的大理石纹理图案具有无缝拼贴的属性，因此能够直接被用于装饰三维对象以及绘制场景。

Cause Analysis of Connecting Plate Cracking for Concrete Mixing Carrier Vehicle

混凝土搅拌运输车连接板裂纹的成因解析