缝的例句大全

Finite Element Analysis of Stress Field in Anamorphic Joint Seam

结构变形缝部位应力场的有限元分析

Origin analysis and treatment of anchor block cracking for Baiyanghe inverted siphon

白杨河倒虹吸镇墩裂缝成因分析及处理

By the engineering example, the reason and the treatment method of the concrete crack under anchorage device of post-tensioned concrete beam are analyzed.

从工程实例出发，分析了后张预应力混凝土梁锚下混凝土裂缝产生的原因和处理方法。

Analyzing the reason of concrete crack under anchorage device of post-tensioning pre-stressed concrete hollow slab

后张预应力混凝土空心板锚下混凝土裂缝原因分析

In the constant load and live load under the action of shear pin, and the circumferential weld will withstand high amplitude of cyclic stress, the strength and fatigue problem should cause height to take seriously.

在恒载和活载的作用下，剪力销以及其周边焊缝将承受幅值较高的应力循环，其强度和疲劳问题应引起高度重视。

The phenomenon of present ground fissures have been discovered in many countries in the world, the frequency and the degree of disaster are anabatic year by year.

现代地裂缝现象在世界许多国家都有发现，其发生频率和灾害程度逐年加剧。

Optimum Design of Angle Bar Die Analysis of Crack in the Corner of Slab

角板冲模的优化钢筋混凝土结构板角斜裂缝分析

The joint shapes suited for CO_2 welding are designed Under which weld quality is still assured but the groove angle and size of fillet weld are reduced. By ways of these the productivity is increased and cost decreased.

提出了适合于CO2焊特点的接头形式，该接头形式在保证焊接质量前提下，减小了对接焊的坡口角度及角焊缝的焊脚尺寸，可以提高焊接生产率，降低成本。

The machine is mainly used for extrusion and connection of 45 ° seam casement window with angle joint structure.

门窗单头组角机主要用于角码结构的平开门窗45°接缝的挤压联结。

Study on Stress Concentration Resulted from Angular Deformation and Welding Butt Joints on Spherical Tanks ( I)

球罐焊缝错边及角变形引起应力集中的研究（Ⅱ）

Presents model for angular deformation of longitudinal weld.

提出压力容器简体纵焊缝产生角变形的模型。

Measuring of angular deformation degree of container welding seam

容器焊缝角变形度检测

Argillaceous reservoir is a new exploration region worthy of attention and has good exploration prospect.

泥岩裂缝油气藏的油气以自生自储式为主：泥质岩油气藏作为值得重视的一个勘探新领域，具有较好的勘探前景。

In welding process, under arc light, how to photograph the starting and expasion process of weld solidification crack is studied in this paper.

研究了在实际焊接过程中的电弧光下如何拍摄记录焊缝凝固裂纹的启裂和扩展的过程。

In recent years, Proterozoic and Archaeozoic buried hill reservoirs have been explored and developed in Liaohe Oilfield, but it is a problem to interpret these fracture-cavity reservoirs.

近年来，辽河油田元古界、太古界古潜山油气藏得到了比较好的勘探与开发，但对这些缝洞性储层的解释一直是一个难题。

Not only the area of the net section increases, but also the concentration of stresses beside the notch relaxes as the tip thickness decreases.

减小指端宽度非但能增大指接受力面积，并使指端缺口旁的应力集中得到缓和.NET组件无缝地交互。

Argillaceous reservoirs are mainly located in the over-pressured microfracture zone;

泥质岩油气藏主要位于超压泥质岩微裂缝带内，该带在垂向上集中分布在一定区间，平面上可以区域对比；

Study on microcomputer control system of weld penetration in argon arc welding using infrared monitor

红外检测钨极氩弧焊焊缝熔深微机控制系统的研究

Objective To screen mutation of GJA 3 gene in patients with congenital cataract.

目的研究缝隙连接蛋白基因GJA3与先天性白内障的关系.

Aran anticline northwest dumping fractured reservoir development is the most favorable position. 6.

Aran背斜的西北倾伏端是裂缝性储层发育最有利的部位。