聚合的例句大全

The effects of polymerization conditions, such as initiator concentration, monomer concentration, reaction time and temperature, on grafting parameters were studied.

研究了各种聚合条件如：引发剂浓度、单体浓度、反应时间、温度等对接枝参数的影响。

The effects of radiation environment, radiation dose, monomer concentration and reaction temperature in terms of grafting parameters were investigated systematically.

系统研究了辐射气氛、辐射总剂量、单体浓度以及聚合反应温度对体系接枝参数的影响。

Biosorption of Pb~ ( 2+) by extracellular polymeric substances produced by Aspergillus fumigatus

烟曲霉胞外聚合物对Pb~（2+）的吸附特性

The polarity of solvent showed a greater effect on the ordered structure of the gels.

溶剂的极性对聚合物凝胶的规整性有较大的影响.

Comparison of performances of some polymer modified asphalts

几种聚合物改性沥青性能的比较

Evaluation of Low Temperature Performances of Polymer Modified Asphalts by Force-Ductility Test

用测力延度试验评定聚合物改性沥青低温性能

Analysis of Modifying Polymer in the Modified Asphaltum Waterproof Membrane

改性沥青防水卷材中的改性聚合物的光谱分析

Detection of pathogenic Entamoeba histolytica DNA in liver abscess aspirates with polymerase chain reaction

用聚合酶链反应检测肝脓液中溶组织内阿米巴复制基因片段

Studies on atactic specific polymerization of propene with mononuclear Titanocene Catalysts

单茂钛催化剂的丙烯无规聚合反应及其动力学研究

Analysis of the mechanical behavior of polymer in an amorphous state under uniaxial extension condition through atomistic modeling

原子模型分析无定型聚合物在单轴拉伸下的机械行为

Measures also have an aggregation function applied to the column or column expression.

度量还有一个应用于列或列表达式的聚合函数。

PCR ( polymerase chain reaction) technology is specific, sensitive, simple and rapid. Research on detecting pathogenic bacteria in food by PCR technology is ascendent.

PCR（聚合酶链式反应）技术具有特异性强、灵敏度高、操作简单、快速的特点，使用PCR技术检测食品中致病菌的研究方兴未艾。

XPS and FTIR measurements showed that there was still a great amount of residual azido groups on the surfaces of the functionalized MWNTs after clicking three layers of polymers.

XPS和FTIR测试表明，在接枝三层聚合物后，碳纳米管的表面仍然有大量的剩余叠氮基团。

Polymers give plastic its ability to be shaped and its strength.

聚合体使塑料具有可塑性和韧性.

In the experiment, nuclear boiling, the convergence and break up of liquid-plug and vapor-slug were observed.

实验中观察到核态沸腾 、 汽液塞的聚合、破碎以及振荡等主要现象.

Contraction flow behavior contributes significantly to the orientation and structure of molecular in micro injection molding.

聚合物流体的收缩流动行为是微注射成型工艺过程中影响分子取向与结构的重要因素.

Three ID Mn ( II)-azido coordination polymers ( 1-3) and a 2D molecular-based magnet ( 8).

含μ-1，3（EE）和μ-1，1（EO）叠氮桥的Mn（Ⅱ）配位聚合物（包括一个分子基磁体）。

Mingling C 60/ C 70 and asphalt with alkyd varnish at the same time, the absorbance of the polymerization film decreased nonlinearly with the increase in wavelength in the range of 350-760 nm, and also the strength of the film was improved.

将C60/C70和沥青同时掺入醇酸清漆中，聚合后薄膜的吸光度在350～760nm波段随波长的增加而呈非线性下降，同时薄膜的强度也有所提高。

A thermoplastic resin obtained by polymerization of indene and coumarone; used in coatings and paint and asphalt tile.

一种热塑性树脂，聚合茚和香豆酮制成，用于涂层、油漆和沥青砖。

Purposes: Manufacturing hydrogen peroxide, dye intermediates, light-cured resin catalyst, photodegradation membrane, coatings and photosensitive polymerization initiator.

用途: 制造双氧水 、 染料中间体 、 光固化树脂催化剂 、 光降解膜, 涂料和光敏聚合引发剂.