蚀的例句大全

An aeration device for hydrogen sulfide for sulfide stress corrosion cracking test

H2S应力腐蚀试验用H2S气通设计

The result showed: windward slopes of crescent dune are basically in the process of wind erosion.

结果表明：新月型沙丘迎风坡基本处于风蚀过程；

Crevice corrosion of Cu based shape memory alloy in saline solution

Cu基形状记忆合金在生理盐水中的缝隙腐蚀

Mechanism Analysis of the Crevice Corrosion of Liquid Chlorine Steel Cylinders and Protection Methods

液氯钢瓶缝隙腐蚀的机理分析及防范措施

Influence of iron as alloying element on crevice corrosion behavior of titanium

合金元素铁对钛缝隙腐蚀性能的影响

Crevice Corrosion of Stainless Steel Seal Surface in Acetic Acid and Countermeasures

不锈钢密封面在醋酸中的缝隙腐蚀及对策

The effect of the number of composite wrap layers, the fiber orientations of non crimp fabrics, external impact and environment factors on the compressive failure are discussed.

外界预冲击作用和环境因素&水与热的侵蚀对该复合材料-混凝土增强系统抗压破坏的影响。

The influence of α-Al2O3 micropowder additions on permanent linear change, apparent porosity, cold crushing strength and slag resistance of MgO-Al2O3 based castable is studied in this paper. By EDAX analysis, the mechanism of slag corrosion is investigated.

研究α-Al2O3微粉加入量对钢包渣线用镁铝质浇注料线变化率、显气孔率、耐压强度和抗渣性能的影响，借助EDAX分析，探讨了浇注料的渣蚀机理。

Sandstone in acidic diagenetic enviroment has such characteristic as fast compaction rate, earlier compaction stage, prevalent grain solution and crushing, poor heat resistance and crushing resistance, small free growing space of authigenic mineral, poor reservoir properties and so on.

偏酸性成岩环境砂岩具有快速压实阶段较早、颗粒溶蚀一压碎现象普遍而抗热性和抗压性差、自生矿物的自由生长空间较小以及储集性质较差等特点。

It has many merits, such as can melt repeatedly, no subcooling or crystalline humor separation phenomenon during crystalline, cheap price, non-toxic, non-corrosiveness and so on.

能反复融解、结晶而不发生过冷或晶液分离现象；价格便宜、无毒且无腐蚀性等优点。

Cupric hydroxide recovery from printed-circulit plate etching waste liquor

从印制电路板蚀刻废液中回收氢氧化铜

The preparation of cuprous chloride from etching waste liquor of cupric chloride and crude copper powder was studied. The result showed that this method had many advantages, including simple process, easy operation and good quality of product, therefore it had remarkable economic and environmental benefits.

以氯化铜蚀刻液废液、粗铜粉等为原料，在常温下反应制备氯化亚铜，工艺简单，操作简便，产品质量好，具有显著的经济效益和环境效益。

According to the different industries, the requirements for epoxy curing agents are not the same. Excellent performance of the epoxy curing agent can make the cured product has good stability, high heat resistance and corrosion resistance effect.

根据各行业的不同需求，对环氧树脂固化剂的要求也不尽相同。性能优良的环氧树脂固化剂可以使得固化产物具有稳定性好、耐热性高、抗腐蚀效果好等特点。

Results Before radiotherapy and chemotherapy, hair cuticle cells arranged regularly with smooth, homogenous and shiny surface, no obvious erosion phenomenon;

结果放、化疗前，毛小皮细胞排列较规则，细胞表面光滑，无明显侵蚀现象；

Realization of underwater cutting environment and experimental study on erosion performance with underwater jet

水下切割环境的实现及射流冲蚀性能试验研究

For example, the steam cylinder bolt for ultra-supercritical turbine requires not only enhanced high temperature strength and ductility, but also good corrosive and wearing resistance.

例如：用于超超临界汽轮机组的汽缸螺栓，不但要求具有足够高的高温强度和韧性，而且要求良好的抗腐蚀和耐磨性能。

Epoxy asphalt concrete with good properties of high strength, high rigi-ty, antifatigue and corrosion resistance is extensively abroad used for bridge surface pavement, road surface wearing Layer and traffic parking station, etc, and application process is more maturity.

环氧沥青混凝土具有强度高、刚度大、耐疲劳、耐腐蚀等许多优良特性，国外广泛应用于桥面铺装、路面磨耗层、公交停车站等场所，技术已趋成熟。

To avoid early steel corrosion and expensive repair measures within the intended service life of reinforced concrete structures several concepts for durability design have been developed in recent years.

为了避免早期的钢筋锈蚀和高昂的维修费用，针对耐久性设计的许多观点在近几年内已经开始发展。

Analysis of stress corrosion during forced cooling of hot rolled coil

热轧钢卷强制冷却中的应力腐蚀分析

Especially to the stripping of SLA prototype, use the similar principle similar to solubility parameter of principle of polarity, have confirmed that corrode and destroy the organic solvent of SLA prototype, thus the difficult problem stripped after solving the chemical copper facing of SLA prototype effectively.

特别是针对SLA原型的剥离，运用极性相似原则和溶解度参数相近原则，确定了有效腐蚀和破坏SLA原型的有机溶剂，从而解决了SLA原型化学镀铜后剥离的难题。