进行的例句大全

A kinetic equation for combustion of coke fines composed of different grain sizes in sintering is established and an analysis for kinetics was carried out in this paper.

本文建立了烧结用不同粒级焦粉混合燃烧的动力学方程，并进行了相应的动力学实验分析。

This article had studied the key factors for quality of strong fragrant peanut oil, and discussed the effects of peanut, manufacturing process and fining process on peanut oil.

本文对影响浓香花生油品质的因素进行了研究，并探讨了原料、制取工艺和精炼工艺对浓香花生油品质的影响。

On a small-sized combustion test rig for pulverized coal an experimental investigation was performed of the forced ignition characteristics of two types of pulverized coal-air flow under different conditions.

在一座小型煤粉燃烧试验台上，对不同条件下，两种煤粉气流的强迫点火特性进行了试验研究。

In this paper, the investor's risk preference is described as the investor's conversion profit what defined as fuzzy variable. Under voluntary conversion and forced conversion, the conversion conditions of convertible bonds are given based on the investor's preference.

本文利用投资者要求的转换收益的大小来描述其风险偏好，并将其定义为模糊变量，在自愿转换和强制转换两种情况下，对基于投资者风险偏好的可转换债券转换条件进行了判定。

The formation mechanism and properties of forced vortex in a hydrocyclone and its influence on the performance of the cyclone are studied systematically and thoroughly in this paper.

本文对水力旋流器中强制涡的形成，性质及作用等方面进行了较全面的深入探讨。

To investigate the forcing function effects on the fundamental 2 E gust unsteady aerodynamic response of a multistage turbomachine blade row, a series of fundamental experiments are performed in an axial flow research compressor.

为了研究扰动力函数对多级叶轮机叶片排中基本的高、低能阵发非定常气动响应的影响，在研究用轴流压气机上进行了一系列的基础研究。

In order to reduce the vibration, we first make a modal analysis of the handle of the walking tractor and find that the second modal frequency is coupled with the primary forcing frequency of the engine.

为了减小振动，首先对扶手架进行模态分析，发现了第二阶模态频率与发动机一阶惯性力频率耦合。

This kind of material is compounded using soft fibers and suitable resin matrix and formed plate or sheet after heat compression.

这类复合材料主要利用柔软的纤维和适量树脂基体进行复合，经压制形成板材或片材使用。

This article makes a brief introduction to the design characteristics and construction method of the tower structure which is formed of the cable pylon and the fastening pylon, and also performs an analysis and exploration of the engineering cost of the same.

此文简要介绍了缆塔与扣塔合二为一的塔结构的设计特点、施工方法，并对工程造价进行了探讨和分析。

The numerical simulation of hot die forming process for upper core plate stock in railway was done.

对铁路用上心盘热模压成形过程进行了数值模拟分析，得到了上心盘成形过程的应力场、应变场。

Creep age forming technique was mainly used for large aircraft panels, which took the advantage of the creep characteristics of the metal.

蠕变时效成形技术主要用于大型飞机整体壁板的成形，是利用金属的蠕变特性，将成形与时效同步进行的一种成形方法。

Through experiments and FEM of ANSYS/ LS_DYNA program, the deforming mode for free electromagnetic forming and modeled forming of sheet metals are analyzed.

通过实验及ANSYS/LS DYNA程序的有限元模拟，对平板件的电磁自由成型及有模成型的变形模式进行了研究。

This part describes the designing of the needle bearing testing machine, which is used for the bearing wearing test.

其次，进行了襟翼滚针轴承磨损试验机的设计。

The result shows that the requirements and testing methods for flammability of building materials are similar between the United State and Canada, and they mainly are engaged in the test of combustibility and flame spread.

通过研究认为美国和加拿大对建筑材料燃烧性能的要求和试验方法基本相似，他们主要针对材料的燃烧性、火焰传播进行检测；

The variation laws of wearing character on V-packing are studied in the whole working life. The wearing character include the friction force, axial extrusion stress and axial pressure distribution.

对V形密封在整个工作寿命中，轴向挤压应力、轴向压力分布、摩擦力等特性变化进行实验研究。

The shearing properties of asphalt mixture in wearing layer of a testing section of Gangzhou-Wuzhou Expressway are evaluated by the single penetration test and unconfined compression test.

利用单轴贯入试验和无侧限抗压试验，对广梧高速公路试验段面层沥青混合料的抗剪性能进行了评价和检验。

The cross testing method is applied to analyze and design wearing test of sucker rod and oil tube.

运用正交实验法对抽油杆与油管的磨损实验进行分析和设计。

A gale hit the 6th agricultural division on August 22, 2005.Based on several materials such as surface, high altitude and radar data, this paper analyzed and summarized the gale weather process, then got some conclusions that will be referred to gale forecast and warning.

利用地面、高空及云图、雷达资料对2005年8月22日晚一场袭击农六师各地的大风天气过程进行了分析总结，并得出一些对临近预报有意义的结论。

The principle and method of warning limit and warning degree is probed into, and the early-warning signal evaluation model is provided.

对警限和警度的确定原则、方法进行探讨，提出预警信号评价模型。

The Error Affect and Its Dispel Ways of Machine Tool While Using the Engaged Separating Test Technology for Gear Reign Measure

啮合分离测试技术进行齿轮在位测量时机床误差影响与消除方法